The Optimal Design of a Concentric Coil, Radial Magnet Moving Magnet Actuator
نویسنده
چکیده
منابع مشابه
Design and Optimization of a Rotary Actuator for a Two Degree-of-Freedom zφ-Module
The paper concerns the design and optimization of a rotary actuator which is applied in a pick-and-place robot. The rotary actuator is part of a zφ-module and provides ±180°rotation. The rotor of this actuator is attached to a linear actuator which offers a z-motion of ±5 mm. In the paper, the optimal combinations of magnet poles and coils are determined for this slotless actuator with concentr...
متن کاملOptimal Design of a Permanent Magnetic Actuator for Vacuum Circuit Breaker using FEM
This paper presents the characteristic analysis and the optimal design of a permanent magnetic actuator (PMA) for a vacuum circuit breaker (VCB) using a two-dimensional finite element analysis. The purpose of this research about a PMA is to minimize the breaking time and the volume of the permanent magnet within the limits of the holding force and maximum current in the coil. The conjugate grad...
متن کاملMoving iron actuator
– The paper describes design and optimisation of a tubular moving-iron linear permanent magnet motor for reciprocating compressor using finite element. The four leading design parameters are optimised individually. To validate the process reaches an optimal design, two leading parameters are varied simultaneously. This is due to one parameter may influence other parameters. The linear motor is ...
متن کاملA Two-Dimensional Laser Scanning Mirror Using Motion-Decoupling Electromagnetic Actuators
This work proposes a two-dimensional (2-D) laser scanning mirror with a novel actuating structure composed of one magnet and two coils. The mirror-actuating device generates decoupled scanning motions about two orthogonal axes by combining two electromagnetic actuators of the conventional moving-coil and the moving-magnet types. We implement a finite element analysis to calculate magnetic flux ...
متن کاملSimulation, design and experimental validation of a passive magnetic damper for ultra-fast actuators
A contact system driven by a high energetic Thomson actuator requires to be decelerated from full speed down to zero. The forces originated from the interaction between a stationary copper tube and a moving array of magnets combined with plastic or ferromagnetic material are used to generate eddy-current damping. Five different configurations of small but strong (N52) neodymium magnets and spac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016