Realizing the Embedded Growth of Large Li2O2 Aggregations by Matching Different Metal Oxides for High‐Capacity and High‐Rate Lithium Oxygen Batteries

Large Li2O2 aggregations can produce high-capacity of lithium oxygen (Li-O2) batteries, but the larger ones usually lead to less-efficient contact between Li2O2 and electrode materials. Herein, a hierarchical cathode architecture based on different discharge characteristics of α-MnO2 and Co3O4 is constructed, which can enable the embedded growth of large Li2O2 aggregations to solve this problem. Through experimental observations and first-principle calculations, it is found that α-MnO2 nanorod tends to form uniform Li2O2 particles due to its preferential Li+ adsorption and similar LiO2 adsorption energies of different crystal faces, whereas Co3O4 nanosheet tends to simultaneously generate Li2O2 film and Li2O2 nanosheets due to its preferential O2 adsorption and different LiO2 adsorption energies of varied crystal faces. Thus, the composite cathode architecture in which Co3O4 nanosheets are grown on α-MnO2 nanorods can exhibit extraordinary synergetic effects, i.e., α-MnO2 nanorods provide the initial nucleation sites for Li2O2 deposition while Co3O4 nanosheets provide dissolved LiO2 to promote the subsequent growth of Li2O2. Consequently, the composite cathode achieves the embedded growth of large Li2O2 aggregations and thus exhibits significantly improved specific capacity, rate capability, and cyclic stability compared with the single metal oxide electrode.