Wall corrections in modeling rotating pipe flow
نویسنده
چکیده
منابع مشابه
On the Universality of the Velocity Profiles of a Turbulent Flow in an Axially Rotating Pipe
Abstract. If a fluid enters an axially rotating pipe, it receives a tangential component of velocity from the moving wall, and the flow pattern change according to the rotational speed. A flow relaminarization is set up by an increase in the rotational speed of the pipe. It will be shown that the tangentialand the axial velocity distribution adopt a quite universal shape in the case of fully de...
متن کاملOptimizing naturally driven air flow in a vertical pipe by changing the intensity and location of the wall heat flux
Heat transfer from the internal surfaces of a vertical pipe to the adjacent air gives rise to the air flow establishment within the pipe. With the aim of optimizing the convective air flow rate in a vertical pipe, the details of the flow and thermal fields were investigated in the present study. Conservation equations of mass, momentum, and energy were solved numerically using simple implicit f...
متن کاملModeling and Analysis of Viscous Dissipation Phenomenon on Temperature Distribution in the Process of Injection Explosive Fluid
The explosive viscous liquid becomes inject to warhead by discharge system. The injection device is consisted of a piston to move down and leads the viscous fluid through the cylindrical pipe towards the end of the duct. Then the viscous fluid leads into a convergent path that will be injected to the warhead or other injection equipment. In this project, the path of viscous fluid flow is divide...
متن کاملAdded Resistance of an AUV Moving Inside a Water Pipeline Due to Wall Proximity
This paper evaluates the added resistance of a torpedo shape AUV, moving inside a water pipeline, due to wall effects within the tube. Today, there are long length pipelines of water or petroleum that need to regular inspection. Early detection of failure will help to prevent breakdown and avoid the huge cost of an accident. As pipelines are enclosed environments and difficult to access, pipeli...
متن کاملPitot probe corrections in fully developed turbulent pipe flow
Mean flow measurements taken in fully developed turbulent pipe flow over a wide Reynolds number range are used to evaluate current methods of correcting Pitot probe data. Based on this evaluation, a new form for the displacement correction is proposed which appears to be more accurate over a wider range of conditions than those currently available. The difficulty of obtaining the true near-wall...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2002