Trajectory Planning for a Welding Robot Based on the Bezier Curve
نویسندگان
چکیده
According to the requirements for tower crane welding robots, precisely planning the welding trajectory is essential. The optimal model for the least-time trajectory planning for the robot is established by Bezier curve, which has the characteristic of sub-section processing. With the consideration of constraints such as joint angular velocity and acceleration, the specific operation steps of genetic algorithm (GA) optimization are presented. A weld seam trajectory example is then proposed, and the simulation of a robot’s trajectory planning is carried out. The result shows that the curve is smooth and steady, and can satisfy the requirements of tower crane welding operations. This method significantly reduces the motion time, and improves working efficiency.
منابع مشابه
Robot Velocity Based Path Planning Along Bezier Curve Path
This paper presents a path planning method considering physical limits for two-wheeled mobile robots (TMRs). A convolution operator is used to generate the center velocity trajectory to travel the distance along predefined Bezier curve while considering the physical limits. The trajectory gained through convolution does not consider the rotating angle of TMR, so we present a transformational me...
متن کاملOptimal Trajectory Planning of a Box Transporter Mobile Robot
This paper aims to discuss the requirements of safe and smooth trajectory planning of transporter mobile robots to perform non-prehensile object manipulation task. In non-prehensile approach, the robot and the object must keep their grasp-less contact during manipulation task. To this end, dynamic grasp concept is employed for a box manipulation task and corresponding conditions are obtained an...
متن کاملMidcourse Trajectory Shaping for Air and Ballistic Defence Guidance Using Bezier Curves
A near-optimal midcourse trajectory shaping guidance algorithm is proposed for both air and ballistic target engagement mission attributes for generic long range interceptor missile. This guidance methodology is based on the maximum final velocity as the objective function and maximum permissible flight altitude as the in-flight state constraint as well as the head-on orientation as the termina...
متن کاملConvolution-based Time Optimal Path Planning for a High Curvature Bezier Curve Considering Possible Physical Limits
This paper proposes a time optimal path planning while considering the physical constraints of wheeled mobile robots along a high curvature Bezier curve. The proposed algorithm overcomes drawbacks of preceding results. A trajectory produced through acceleration limits showed long traveling time, non-uniform sampling time and unsatisfied terminal velocity. A convolution-based method to consider ...
متن کاملSmooth Trajectory Planning Along Bezier Curve for Mobile Robots with Velocity Constraints
This paper presents a smooth path planning method considering physical limits for twowheeled mobile robots (TMRs). A Bezier curve is utilized to make an S-curve path. A convolution operator is used to generate the center velocity trajectory to travel the distance of the planned path while considering the physical limits. The trajectory gained through convolution does not consider the direction ...
متن کامل