A 2.5-THz Receiver Front End for Spaceborne Applications

نویسندگان

  • Michael C. Gaidis
  • Herbert M. Pickett
  • C. D. Smith
  • Suzanne C. Martin
چکیده

The OH radical is an important player in known ozone depletion cycles; however, due to its location in the atmosphere, it must be studied from either a balloon or spaceborne platform. For long-term mapping over large portions of the earth, a spaceborne platform is the most desirable. NASA's Earth Observing System Microwave Limb Sounder instrument is slated to house a 2.5-THz Schottky-diode receiver for such measurements. In this paper, we describe the design, fabrication, and testing of the receiver front end. Measured double-sideband (DSB) receiver noise temperatures of better than 9000 K are reproducibly achieved with all devices of our best design. Estimated mixer noise is 3500-K DSB for optimal bias conditions and at room temperature. Selected components will be used in the first terahertz heterodyne receiver to be flown in space.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Calibration Target for Far-Infrared Spaceborne Applications

We describe progress in the development of a calibration target for use in the EOS-MLS 2.5 THz radiometer on NASA's CHEM-1 spacecraft. Although the intended use is as a stable, isothermal black body load at a frequency of 2.5 THz, the design is suitable for use throughout ,the far-infrared (FIR). A wedge design is used for the target body to. enhance the emissivity to desired levels at 2.5 THz....

متن کامل

2.5-THz GaAs Monolithic Membrane-Diode Mixer

A novel GaAs monolithic membrane-diode (MOMED) structure has been developed and implemented as a 2.5-THz Schottky diode mixer. The mixer blends conventional machined metallic waveguide with micromachined monolithic GaAs circuitry to form, for the first time, a robust, easily fabricated, and assembled room-temperature planar diode receiver at frequencies above 2 THz. Measurements of receiver per...

متن کامل

The Namuru Receiver as Development Platform for Spaceborne Gnss Applications

GPS is a well established navigation system in current spaceflight missions. Affordable GPS receivers for small satellite and sounding rocket missions are usually based on Commercial Off The Shelf (COTS) products. Many of these receivers are limited to single frequency tracking and utilise custom ASICs for the signal processing. The Phoenix receiver is an example of a commercially available rec...

متن کامل

Design of High Gain, High Reverse Isolation and High Input Matched Narrowband LNA for GPS L1 Band Applications Using 0.18µm Technology

Design of Global Positioning System (GPS) receiver with a low noise amplifier (LNA) in the front end remains a major design requirement for the success of modern day navigation and communication system. Any LNA is expected to meet the requirements like its ability to add the least amount of noise while providing sufficient gain, perfect input and output matching, and high linearity. However, mo...

متن کامل

An All Solid-State Superconducting Heterodyne Receiver at Terahertz Frequencies

A superconducting hot-electron bolometer mixer receiver operating from 1 to 1.26 THz has been developed. This heterodyne receiver employs two solid-state local oscillators each consisting of a Gunn oscillator followed by two stages of varactor frequency multiplication. The measured receiver noise temperature is 1350K at 1.035 THz and 2700K at 1.26 THz. This receiver demonstrates that tunable so...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2000