Enzyme-based inverse opals: a facile and promising platform for fabrication of biocatalysts.
نویسندگان
چکیده
A facile and promising approach was developed to fabricate enzyme-based 3D-ordered macroporous biocatalysts (enzyme-based inverse opals) by using the colloidal crystal templating method. Horseradish peroxidase- and amylase-based inverse opals were prepared, which verified that this method is suitable for various enzymes.
منابع مشابه
Design and Fabrication of Glucose/O2 Enzymatic Biofuel Cell
Enzyme-based biofuel cells (EBFCs) are systems that use a variety of organic compounds to produce electricity through oxido-reductase enzymes, such as oxidase or dehydrogenase as biocatalysts immobilized on electrodes. In this study, a single-chamber EBFC consisting of carbon electrodes that operating at ambient temperature in phosphate buffer, pH 7 is reported. The EBFC anode was based on gluc...
متن کاملTemplate assisted fabrication technique towards Si-inverse opals with diamond structure
A method to fabricate silicon (Si) inverse opals with diamond structure is introduced. The method is based on the arrangement of silica particles in a template consisting of Si pillars periodically distributed. The profile of the pillars is specially designed to induce the self-organized growth of the particles in a diamond lattice along the (1 1 0) direction. Afterwards, the inverse structure ...
متن کاملAl2O3/TiO2 inverse opals from electrosprayed self-assembled templates
The fabrication of high optical quality inverse opals is challenging, requiring large size, three-dimensional ordered layers of high dielectric constant ratio. In this article, alumina/TiO2-air inverse opals with a 98.2% reflectivity peak at 798 nm having an area of 2 cm2 and a thickness of 17 µm are achieved using a sacrificial self-assembled structure of large thickness, which was produced wi...
متن کاملSacrificial-Layer Atomic Layer Deposition for Fabrication of Non-Close-Packed Inverse-Opal Photonic Crystals
Photonic crystals have been studied extensively for their potential to control and manipulate light, similar to the way electrons are controlled in a semiconductor, opening the door to high-speed, low-power, all-optical devices. A common method for fabricating 3D photonic crystals is the infiltration and subsequent inversion of synthetic opal templates to create inverse opals consisting of air ...
متن کاملFabrication of an Electrochemical Immunosensor for Determination of Human Chorionic Gonadotropin Based on PtNPs/Cysteamine/AgNPs as an Efficient Interface
An ultrasensitive electrochemical immunosensor for the detection of tumor marker human chorionic gonadotropin (hCG) was developed with a limit of detection as low as 2 pg mL-1 in phosphate buffer. The Platinum nanoparticles (PtNPs) were electrodeposited to modify the gold surface and to increase enlarging the electrochemically active sites, resulting in the facilitation of electron exchange. Cy...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Chemical communications
دوره 50 41 شماره
صفحات -
تاریخ انتشار 2014