A systematic evaluation of the role of crystalline order in nanoporous materials on DNA separation.

نویسندگان

  • Neda Nazemifard
  • Ledi Wang
  • Wenmin Ye
  • Subir Bhattacharjee
  • Jacob H Masliyah
  • D Jed Harrison
چکیده

The role of order within a porous separation matrix on the separation efficiency of DNA was studied systematically. DNA separation was based on a ratchet mechanism. Monodisperse colloidal suspensions of nanoparticles were used to fabricate highly ordered separation media with a hexagonal close-packed structure. Doping with a second particle size yielded structures with different degrees of disorder, depending upon the volume fraction of each particle size. Radial distribution functions and orientational order parameters were calculated from electron micrographs to characterize the scale of disorder. The peak separation distance, band broadening, and separation resolution of DNA molecules was quantified for each structure. DNA separation parameters using pulsed fields and the ratchet effect showed a strong dependence on order within the porous nanoparticle array. Ordered structures gave large separation distances, smaller band broadening and better resolution than highly disordered, nearly random, porous structures. The effect dominated these three parameters when compared to the effect of pore size. However, the effect of order on separation performance was not monotonic. A small, but statistically significant improvement was seen in structures with short range order compared to those with long range order.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Application of Hydrothermal and Non-Hydrothermal TiO2 Nanoporous Materials as New Adsorbents for Removal of Heavy Metal Ions from Aqueous System

Hydrothermal and non-hydrothermal spherical TiO2 nanoporous with crystalline framework were prepared by sol-gel method. The Crystalline structures, morphologies and surface texturing of materials were determined by X-ray diffraction (XRD), scanning electron microscopy (SEM) and N2 adsorption-desorption isotherms. The Hydrothermal spherical TiO2 nanoporous was found to have a narrow and strong p...

متن کامل

Synthesis of Nanoporous Metal Organic Framework MIL-53-Cu and Its Application for Gas Separation

MIL-53-Cu has been synthesized hydrothermally and has been used for the first time for gas separation. MIL-53-Cu shows adsorption capacities of 8.1, 0.7 and 0.5 m.mol/g, respectively, for CH4, CO2 and H2 at 30 bar and 298 K. The high CH4 adsorption capacity of MIL-53-Cu maybe attributed to the high pore volume and large number of open metal sites....

متن کامل

An Experimental Study of Adsorption Breakthrough Curves for CO2/CH4 Separation in a Fixed Bed of Nanoporous Shaped Copper Trimesate Metal Organic Framework

Copper trimesate (Cu-BTC) MOF has been pointed out as a promising adsorbent for separating carbon dioxide from methane. However, MOF’s need to be shaped prior to their use in packed bed adsorbers in order to reduce pressure drop; on the other hand, the production of mechanically resistant shaped bodies reduces their adsorption performance. In this work, Cu-BTC tablets provided by BASF are evalu...

متن کامل

Synthesis and Characterization of a Novel Modified ANA Zeolite Membrane

A Novel modified Analcime (Na16 (Al16Si32O96) •16H2O) zeolite with a new molar ratio have been successfully synthesized. In order to investigate the role of the template, Different samples were synthesized with and without Tetramethylammoniumhydroxide (TMAOH) template through hydrothermal method. Different synthesis times (24, 36 and 72 hours) and molar ratios have been utilized. The optimum sa...

متن کامل

Addition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior

Microporous Calcium Titanium Phosphate glass-ceramics have many uses in high-tech industries. For example, they have applications in catalysts industry. In this study, different molar percentages of alumina were added to a glass with P2O5 30, CaO 45, TiO2 25 (mol%) composition. The samples were melted at 1350°C and crystallization heat treatment was performed on...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Lab on a chip

دوره 12 1  شماره 

صفحات  -

تاریخ انتشار 2012