Robust Control of a Heat Exchanger Using a Smith Predictor
نویسندگان
چکیده
This paper investigates the robustness of a time delayed system controlled by a PI controller with a Smith Predictor used to compensate the dead time. A heat exchanger process is used as a test bed for the proposed control structure. Feed-forward control is used to compensate for the disturbance effect. The effectiveness of the design procedure is tested using Matlab-Simulink models and frequency analysis for the robustness is performed.
منابع مشابه
Robust Digital LQ Control of Time-delay Systems
Time-delays are mainly caused by the time required to transport mass, energy or information, but they can also be caused by processing time or accumulation. Typical examples of such processes are e.g. pumps, liquid storing tanks, distillation columns or some types of chemical reactors. This paper deals with a design of universal and robust digital control algorithms for control of great deal of...
متن کاملLQ Control Of Heat Exchanger - Design And Simulation
Heat exchangers are devices whose primary responsibility is the transfer (exchange) of heat, typically from one fluid to another. However, they are not only used in heating applications, such as space heaters, but are also used in cooling applications, such as refrigerators and air conditioners. Heat exchange processes often contain time-delay. This paper deals with design of universal and robu...
متن کاملA combined FSP and reset control approach to improve the set-point tracking task of dead-time processes
This paper presents a non-linear control scheme to deal with dead-time processes, specially for systems where fast closed-loop responses are required. The control scheme is based on the combination of two control strategies appeared in the literature to deal with dead-time processes, the Filtered Smith Predictor (FSP), which is a Smith Predictor (SP) including a filter to improve the robustness...
متن کاملNeural-Smith Predictor Method for Improvement of Networked Control Systems
Networked control systems (NCSs) are distributed control systems in which the nodes, including controllers, sensors, actuators, and plants are connected by a digital communication network such as the Internet. One of the most critical challenges in networked control systems is the stochastic time delay of arriving data packets in the communication network among the nodes. Using the Smith predic...
متن کاملBilateral Teleoperation Systems Using Backtracking Search optimization Algorithm Based Iterative Learning Control
This paper deals with the application of Iterative Learning Control (ILC) to further improve the performance of teleoperation systems based on Smith predictor. The goal is to achieve robust stability and optimal transparency for these systems. The proposed control structure make the slave manipulator follow the master in spite of uncertainties in time delay in communication channel and model pa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012