Effects of Synthetic and Processing Methods on Dispersion Characteristics of Nanoclay in Polypropylene Polymer Matrix Composites
نویسندگان
چکیده
This work presents the effect of synthetic procedures (extrusion and casting) on the dispersion characteristics of nano layered silicate clay particles in the polypropylene (PP) polymer matrix. Three different molecular weights PP samples are taken and filled with nanoclay of 1 wt% and 3 wt%, and these nanocomposites were synthesized by using an extrusion or casting methods. The X-ray diffraction (XRD) and Transmission Electron Microscopy (TEM) is used to characterize the structure and morphology of nanocomposites. Rheological and mechanical results show that the extruded products are better than that of cast products. The outcome of this work is discussed in this paper.
منابع مشابه
Effect of Carbon Nanotube and Surfactant on Processing, Mechanical, Electrical and EMI-Shielding of Epoxy Composites
Dispersing nanoparticles in a polymer matrix is intrinsically challenging due to unfavorable entropic interactions between the matrix and the nanoparticle. In this research dispersion of nanoparticles in polymer matrix was studied and the effect of dispersion on properties was investigated. The properties of polymer composite depend on the type, size, shape, concentration of nanoparticles, and ...
متن کاملPolypropylene/Modified Nanoclay Composite-Processing and Dyeability Properties
Polymer nanocomposites are new classes of composite materials derived from nanoparticles with at least one dimension in the nanometric range. Polypropylene nanocomposites have attracted a considerable interest due to its most widely used and fastest growing classes of thermoplastic polymer with low cost and low density. However, a problem associated with polypropylene is its dyeability. There h...
متن کاملOn the Thermal Conductivity of Carbon Nanotube/Polypropylene Nanocomposites by Finite Element Method
In this paper, finite element method is used to obtain thermal conductivity coefficients of single-walled carbon nanotube reinforced polypropylene. For this purpose, the two-dimensional representative volume elements are modeled. The effect of different parameters such as nanotube dispersion pattern, nanotube volume percentage in polymer matrix, interphase thickness between nanotube and surroun...
متن کاملStudying the Effect of Montmorillonite Nanoclay on Mechanical Properties and the Amount of Nanoclay on Epoxy Siloxane Hybrid Coatings
Create three-dimensional network of siloxane polymer in the epoxy resin is an appropriate mechanical properties .Dispersion of nanoclay in these coating was prepared by ultrasonication method. Mechanical properties of nanocomposit coatings such as abrasion, hardness and adhesion was increased by addition of nanoclay montmorillonite. Different percentages of nanoclay in coating showed that even ...
متن کاملThe Effect of Nanoclay, PP and PP-g-MA Type on Dyeing Properties of PP/clay Nanocomposite with Various Dyes: A Way to Investigate the Dyeability Mechanism
Polypropylenes loaded with different alkyl ammonium-modified montmorillonite are prepared to utilize a melt-mixing technique in various ways. Two types of polypropylene and compatibilizer are incorporated to improve the dispersion of various types of nanoclay and the dyeing behavior of the nanocomposites with various disperses, so acid and basic dyes were studied. For the first time, the aim of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2011