Ceramics overview: classification by microstructure and processing methods.
نویسندگان
چکیده
The plethora of ceramic systems available today for all types of indirect restorations can be confusing--and overwhelming--for the clinician. Having a better understanding of them is key. The authors use classification systems based on the microstructural components of ceramics and the processing techniques to help illustrate the various properties and uses.
منابع مشابه
Gelcasting as a Novel Processing Route to Fabricate Partially Stabilized Zirconia Ceramic Bodies
Bioinert ceramics, like alumina and zirconia are used mainly for replacements of bones, hip joints and for dental implants. Partially stabilized zirconia ceramics (PSZ or TZP with 3 mol.% or 5 wt.% Y2O3), appear as perspective bioinert ceramics because of their high strength and corrosion resistance. In order to fabricate complex shapes, it is essential to use a near ...
متن کاملPowder Processing Science and Technology for Increased Reliability
Issues concerning powder consolidation methods compatible with the colloidal approach and issues associated with other powder processing steps, viz., den-sification and microstructural control, are presented with regard to research directions leading to more reliable ceramics. 1. Introduction With their multiplicity of elemental combinations and crystal structures, ceramics exhibit unique prope...
متن کاملInfluence of Ceramic Technology on the Microstructure and Ferroelectric Properties of Transparent Plzt Ceramics
Mixed-oxides and the coprecipitation procedure were used to prepare PLZT x/65/35 powders. Transparent samples were obtained by hot-pressing. The influence of processing parameters on the microstructure and electrical properties was studied.
متن کاملمطالعات فاز مرزدانهای و ریزساختاری سرامیکهای غیر اکسیدی نیترید سیلیسیم
Engineering ceramics are often difficult to prepare for observation because of their hardness, wear resistance and chemical inertness. Different silicon nitride containing Y2O3 and Al2O3 are prepared and etched using several different techniques and the most efficient methods are identified. The microstructure and grain-boundary composition were examined by electron microscopy (SEM, TEM), ...
متن کاملUse of vitrified urban incinerator waste as raw material for production of sintered glass - ceramics
The crystallisation behaviour of vitrified industrial waste (fly ash from domiciliary solid waste incineration) was examined by differential thermal analysis, X-ray diffractometry and scanning electron microscopy. It was demonstrated that powder processing route was required to transform the vitrified industrial waste into glass-ceramics products. Time-Temperature-Transformation (TTT) diagrams ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Compendium of continuing education in dentistry
دوره 31 9 شماره
صفحات -
تاریخ انتشار 2010