On the Role of Anisotropy of Membrane Components in Formation and Stabilization of Tubular Structures in Multicomponent Membranes
نویسندگان
چکیده
Influence of isotropic and anisotropic properties of membrane constituents (nanodomains) on formation of tubular membrane structures in two-component vesicle is numerically investigated by minimization of the free energy functional based on the deviatoric-elasticity model of the membrane. It is shown that the lateral redistribution and segregation of membrane components may induce substantial change in membrane curvature resulting in the growth of highly curved tubular structures.
منابع مشابه
CO2 Selective Carbon Tubular Membrane: The Effect of Stabilization Temperature on BTDA-TDI/MDI P84 co-polyimide
Membranes offer remarkable attributes such as possessing small equipment footprints, having high efficiency and are environmentally friendly, with carbon membranes progressively investigated for gas separation applications. In this study, carbon tubular membranes for CO2 separationare prepared via the dip-coating method with P84 co-polyimide as the carbon precursor. The prepared membranes were ...
متن کاملTubular MFI Zeolite Membranes Made by In-Situ Crystallization
Polycrystalline MFI zeolite membranes were prepared on α-alumina tubular support by hydrothermal treatments at 413 K. The synthesized zeolite membranes were characterized by XRD, SEM and single gas permeation. The influence of hydrothermal treatment steps and the calcination time on the zeolite layer formation were investigated. MFI zeolite membrane prepared by four subsequent hydrothermal ...
متن کاملEffect of Dehydration Temperature on the H2 Separation Potential of Hydroxy Sodalite Zeolite Membranes
The main goal of this work was to synthesize and evaluate the effect of dehydration temperature on the potential application of hydroxy sodalite zeolite membrane. Hydroxy sodalite zeolite membranes were synthesized via direct hydrothermal method onto a tubular alumina support without seeding in a hot air oven. The synthesized membranes were characterized by X-ray diffraction (XRD) and scanning ...
متن کاملComparing Two Electrospinning Methods in Producing Polyacrylonitrile Nanofibrous Tubular Structures with Enhanced Properties
Polyacrylonitrile nanofibrous tubular structures were produced through typical and opposite charge electrospinning methods and the effect of the method as well as the two key electrospinning parameters, namely concentration of the electrospinning polymer solution and rotational speed of mandrel collector on properties of such tubular structures were studied. The smples were characterized by...
متن کاملComparison the performance of different reverse osmosis membrane modules by CFD modeling
Reverse osmosis is a commonly used process in water desalination. Due to the scarcity of freshwater resources and wastewater problems, a lot of theory and experimental studies have been conducted to optimize this process. In the present study, the performance of reverse osmosis membrane module of salt–water separation was simulated based on computational fluid dynamics technique and solution-di...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 8 شماره
صفحات -
تاریخ انتشار 2013