Accelerator Modeling System for the Future*
نویسندگان
چکیده
Many computer programs and a variety of models exist for the design of accelerator lattices and the correction of errors. Many physicists contributed to this work by developing codes to suit a variety of machines. At present, we are integrating some of these codes into a unified framework to design and control any type of machine. We will refer to this system of interactive accelerator design, control, and analysis codes as the All-In-One Modeling system (AIM). This paper will explore the utilities of AIM for future accelerator modeling and control. As an example, we will describe a procedure to produce both a linear and a nonlinear model for SPEAR. Presented at the Workshop on Nonlinear Dynamics in Particle Accelerators: Theory and Experiments, Arcidosso, Italy, September 4–6, 1994.
منابع مشابه
Siemens primus accelerator simulation using EGSnrc Monte Carlo code and gel dosimetry validation with optical computed tomography system by EGSnrc code
Monte Carlo method is the most accurate method for simulation of radiation therapy equipment. The linear accelerators (linac) are currently the most widely used machines in radiation therapy centers. Monte Carlo modeling of the Siemens Primus linear accelerator in 6 MeV beams was used. Square field size of 10 × 10 cm2 produced by the jaws was compared with TLD. Head simulation of Siemens accele...
متن کاملSystem Dynamics Modeling in Entrepreneurship Research: A Review of the Literature
System dynamics is a strategic approach for modeling complex systems and analyzing their behavior. Dynamic behavior in entrepreneurial system can be modeled using System Dynamics Approach and dynamic hypotheses about the system`s behavior can be proposed and tested using simulation and computer aided tools. However, as the review of literature shows, studies which link system dynamics modeling ...
متن کاملCommissioning and early experience with a new generation low-energy linear accelerator in zahedan
Introduction: Since commissioning beam data are treated as a reference and ultimately used by treatment planning systems, it is vitally important that the collected data are of the highest quality to avoid dosimetric and patient treatment errors that may subsequently lead to a poor radiation outcome. Beam data commissioning should be performed with appropriate knowledge and pr...
متن کاملProtective and dosimeter design of the stationary and mobile model truck inspection system with electron linear accelerator radiation source
In this work, calculations of leaked dose from vehicle inspection area, the absorbed dose by driver and operator, and the required concrete thickness for shielding the inspection area are presented using the Monte Carlo code MCNPX2.6. The X-ray source of the present vehicle inspection system is a LinatronMi6 accelerator, end of which has only been simulated in this study (the electron beam coll...
متن کاملModeling Accelerator Structures and Rf Components
Computer modeling has become an integral part of the design and analysis of accelerator structures and RF components. Sophisticated 3D codes, powerful workstations and timely theory support all contributed to this development. We will describe our modeling experience with these resources and discuss their impact on ongoing work at SLAC. Specific examples from R&D on a future linear collider and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1994