Static Aeroelastic Analysis for Generic Configuration Wing
نویسنده
چکیده
STATIC aeroelastic analysis capability that calculates A flexible air loads for generic configuration wings was developed. It was made possible by integrating a finite element structural analysis code (MSWNASTRAN) and a panel code of aerodynamic analysis based on linear potential flow theory. The framework already built in MSC/NASTRAN was used, and the aerodynamic influence coefficient matrix was computed externally and inserted in the NASTRAN by means of a DMAP program. It was shown that deformation and flexible air loads of an oblique wing configuration including asymmetric wings can be calculated reliably by this code both in subsonic and supersonic speeds.
منابع مشابه
The Effects of Aeroelastic Deformation on the Unaugmented Stopped-Rotor Dynamics of an X-Wing Aircraft
A new design concept in the development of vertical takeoff and landing aircraft with high forward flight speed capability is that of the X-Wing. The X-Wing is a stiff, bearingless helicopter rotor system which can be stopped in flight and the blades used as two forward-swept wings and two aft-swept wings. Because of the unusual configuration in the fixed-wing mode, there is a high potential fo...
متن کاملNonlinear Aeroelastic Analysis of Joined-wing Aircraft
Joined-wing aircraft are being designed for ‘sensorcraft’ configuration. Joined wings lead to multiple load paths and constraints. The focus of this work is to understand the nonlinear structural as well as aeroelastic behavior of joined wings. The paper presents a formulation for the nonlinear aeroelastic analysis of joined wings. Results are presented for two joined wings configurations. Over...
متن کاملStatic Aeroelastic and Longitudinal Trim Model of Flexible Wing Aircraft Using Finite-Element Vortex-Lattice Coupled Solution
This paper presents a static aeroelastic model and longitudinal trim model for the analysis of a flexible wing transport aircraft. The static aeroelastic model is built using a structural model based on finite-element modeling and coupled to an aerodynamic model that uses vortex-lattice solution. An automatic geometry generation tool is used to close the loop between the structural and aerodyna...
متن کاملDistributed Propulsion Aircraft with Aeroelastic Wing Shaping Control for Improved Aerodynamic Efficiency
This study presents an aeroelastic wing shaping control concept for distributed propulsion aircraft. By leveraging wing flexibility, wing-mounted distributed propulsion can be used to re-twist wing shapes in-flight to improve aerodynamic efficiency. A multidisciplinary approach is used to develop an aero-propulsive-elastic model of a highly flexible wing distributed propulsion transport aircraf...
متن کاملEffect of Wing Sweep Angle on the Vortex Interaction of a Tail-Wing Configuration
The goal of this investigation is to study the effect of wing sweep angle on the horizontal wing-body- tail configurations in subsonic flow. For this purpose, a series of wind tunnel tests were conducted on a model having a moveable horizontal tail and a wing planform with different sweep angles. Tests were performed at different tail deflection angles. Static surface pressure distribution over...
متن کامل