Bascule nanobridges self-assembled with ZnO nanowires as double Schottky barrier UV switches.

نویسندگان

  • Yanbo Li
  • Alexander Paulsen
  • Ichiro Yamada
  • Yasuo Koide
  • Jean-Jacques Delaunay
چکیده

We report the fabrication of a double Schottky barrier (DSB) device by self-assembly of nanowires (NWs). The operating principle of the device is governed by the surface depletion effects of the NWs. High DSBs were formed at the contact interface of ZnO NWs self-assembled into bascule nanobridge (NB) structures. The bascule NB structures exhibited high sensitivity and fast response to UV illumination, having a photocurrent to dark current ratio > 10(4) and a recovery time as short as approximately 3 s. The enhanced UV photoresponse of the bascule NB structure is ascribed to the DSB, whose height is tunable with UV light, being high (approximately 0.77 eV) in dark and low under UV. The bascule NB structure provides a new type of optical switch for spectrally selective light sensing applications ranging from environmental monitoring to optical communication.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Photoresponses of ZnO nanobridge devices fabricated using a single-step thermal evaporation method

We have recently reported fabrication of ZnO nanobridge devices using a single-step thermal evaporation method. In this fabrication process, e completely eliminated the need of either any metal catalysts or a ZnO seed layer to synthesize the ZnO nanobridges. As initially postulated, he morphology of an anisotropic crystalline substrate alone defines the growth region to prevent the random growt...

متن کامل

Single nanowire-based UV photodetectors for fast switching

Relatively long (30 µm) high quality ZnO nanowires (NWs) were grown by the vapor-liquid-solid (VLS) technique. Schottky diodes of single NW were fabricated by putting single ZnO NW across Au and Pt electrodes. A device with ohmic contacts at both the sides was also fabricated for comparison. The current-voltage (I-V) measurements for the Schottky diode show clear rectifying behavior and no reve...

متن کامل

Quantifying the barrier lowering of ZnO Schottky nanodevices under UV light

In this study we measured the degrees to which the Schottky barrier heights (SBHs) are lowered in ZnO nanowire (NW) devices under illumination with UV light. We measured the I-V characteristics of ZnO nanowire devices to confirm that ZnO is an n-type semiconductor and that the on/off ratio is approximately 10(4). From temperature-dependent I-V measurements we obtained a SBH of 0.661 eV for a Zn...

متن کامل

Synthesis, characterization and electrical properties of hybrid Zn2GeO4–ZnO beaded nanowire arrays

We report the syntheses of vertically aligned, beaded zinc germinate (Zn2GeO4)/zinc oxide (ZnO) hybrid nanowire arrays via a catalyst-free approach. Vertically aligned ZnO nanowire is used as a lattice matching reactive template for the growth of Zn2GeO4/ZnO nanowire. The morphology and structure of the as-prepared samples were characterized using X-ray diffractometry (XRD), scanning electron (...

متن کامل

Direct formation of catalyst-free ZnO nanobridge devices on an etched Si substrate using a thermal evaporation method.

Well-aligned single crystalline ZnO nanobridges have been synthesized selectively across the prefabricated electrodes on silicon substrates by a single-step thermal evaporation method without using any metal catalysts or a predeposited ZnO seed layer that was a prerequisite for such synthesis. The growth region was self-defined by the anisotropic surface of the silicon substrate as initially po...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Nanotechnology

دوره 21 29  شماره 

صفحات  -

تاریخ انتشار 2010