CMOS LNA for BLE Applications
نویسنده
چکیده
Bluetooth Low Energy (BLE) is an advanced technology that has been designed as complementary technology to classic Bluetooth and also it is the lowest possible power wireless technology that can be designed and built. This paper provides an overview of bluetooth low energy technology and utilization of CMOS Low Noise Amplifier (LNA) for BLE applications. The aim of this paper is review and comparison of different parameters such as power dissipation, power consumption, noise figure, etc of the CMOS LNA for Bluetooth low energy applications. Keywords—Bluetooth(BT); Bluetooth Low Energy(BLE); CMOS;Low Noise Amplifier (LNA) ; Common gate(CG); Common Source(CS); Noise Figure (NF).
منابع مشابه
Analysis and Design of Single-ended Inductively- degenerated Interstage Matched Common-source Cascode CMOS LNA
The LNA is implemented using 90nm CMOS technology. The cascode topology with single-ended source degeneration using inductor is employed. The high gain is achieved by using common-source (CS) amplifier. A different input matching as well as output matching topology may improve the efficiency and minimize noise of the LNA. An inductance network (Lg, Ls) is used for input matching. An interstage ...
متن کاملA Broadband Low Power CMOS LNA for 3.1–10.6 GHz UWB Receivers
A new approach for designing an ultra wideband (UWB) CMOS low noise amplifier (LNA) is presented. The aim of this design is to achieve a low noise figure, reasonable power gain and low power consumption in 3.1-10.6 GHz. Also, the figure of merit (FOM) is significantly improved at 180nm technology compared to the other state-of-the-art designs. Improved π-network and T-network are used to obt...
متن کاملForward Body Biasing Technique in Current Folded CMOS LNA in Subthreshold Region for Biomedical Applications
A CMOS low noise amplifier with current folded technique has been proposed for ultra-low voltage, ultra-low power biomedical applications. The target frequency is 2.4 GHz and the proposed LNA is implemented in standard 65 and 90 nm CMOS technologies. By exploiting forward body biasing technique in current folded architecture, the LNA is biased in subthreshold region with supply voltage of 350 m...
متن کاملA 3.5 GHz Low Noise, High Gain Narrow Band Differential Low Noise Amplifier Design for Wi-MAX Applications
This paper represents a 3.5 GHz narrow band differential LNA novel design for the improvement and reliability in 180μm CMOS technology. A 3.5 GHz proposed LNA designed structure is a fully integrated 3GHz high gain narrow band LNA by using differential cascode technique with modified inductive degenerated topology. The low power high gain, less noise, CMOS LNA is designed for wimax applications...
متن کاملLow Noise Amplifier Design and Optimization IV.1 CMOS LNA Design and Optimization Overview
Low Noise Amplifier (LNA) is the most critical part of a receiver front end, in term of the receiver performance. Many circuits with different configurations have been proposed for LNA, in different applications. After choosing proper circuit for LNA, this circuit must be designed and optimized. Various techniques have been proposed for LNA design and optimizations. In this section an overview ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017