Strength, stiffness, and microstructure of Cu(In,Ga)Se2 thin films deposited via sputtering and co-evaporation
نویسندگان
چکیده
منابع مشابه
Fabrication Of Cu(In,Ga)Se2 Solar Cells With In2S3 Buffer Layer By Two Stage Process
Cu(In,Ga)Se2 thin films (CIGS) on metallic substrate (titanium, molybdenum, aluminum, stainless steel) were prepared by a two-step selenization of Co-evaporated metallic precursors in Se-containing environment under N2 gas flow. Structural properties of prepared thin film were studied. To characterize the optical quality and intrinsic defect nature low-temperature photoluminescence, were perfor...
متن کاملIN-SITU ANNEALING OF Cu(In,Ga)Se2 FILMS GROWN BY ELEMENTAL CO- EVAPORATION
The effect of in-situ post-deposition annealing on Cu(InGa)Se2 films grown by elemental co-evaporation on microstructure and solar cell performance has been characterized. Films were deposited at a substrate temperature of 400°C and then annealed in-situ at 400°C, 475°C, 500°C and 550°C for times from 1 60 min. Devices made from films grown at 400°C and then annealed at 550°C for 1 minute had c...
متن کاملFabrication of Cu(In,Ga)Se2 Thin Film by Selenization of Stacked Elemental Layer with Solid Selenium
Cu(In,Ga)Se2 thin films were prepared using the classical two-step process approach. In the first step, the metallic precursors were deposited on the soda-lime glass substrates by electron-beam evaporation following the Cu/In/Ga... sequence. The selenization, called the second step, was produced in a rapid thermal processor. This process performed under nitrogen atmosphere of 200 Torr at 200°C ...
متن کاملEffect of Thickness on Properties of Copper Thin Films Growth on Glass by DC Planar Magnetron Sputtering
Copper thin films with nano-scale structure have numerous applications in modern technology. In this work, Cu thin films with different thicknesses from 50–220 nm have been deposited on glass substrate by DC magnetron sputtering technique at room temperature in pure Ar gas. The sputtering time was considered in 4, 8, 12 and 16 min, respectively. The thickness effect on the structural, mo...
متن کاملInfluence of aging temperature on phase transformation and mechanical behavior of NiTi thin films deposited by magnetron sputtering technique
In this study, NiTi thin films were deposited on the glass and NaCl substrates by means of magnetron sputtering method. The influence of aging temperature, over the range 300-500 oC, on phase transformation and mechanical properties of the sputtered NiTi thin films were studied by differential scanning calorimetry (DSC) and nano-indentation assay, respectively. The DSC curves showed that the ag...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014