Centrifuge modelling of sand compaction piles in soft clay under embankment load
نویسنده
چکیده
Sand compaction piles are used in practice for ground improvement of soft subsoil in order to accelerate consolidation, reduce compressibility, and increase strength. The current design procedure of sand compaction piles is based on simple empirical calculations, which does not take full account of the sand pile behaviour. This research project investigates the behaviour of a base reinforced embankment constructed on a soft clay layer, which is improved with sand compaction piles. In order to gain a better understanding of interactions within the structure, physical investigations are being conducted by means of centrifuge modelling. Tests were performed under plane strain conditions in a strong box, using a newly developed sand compaction pile installation tool for in-flight pile construction. Initial analysis of test data shows the change in stress state due to sand compaction pile installation and the influence on clay behaviour.
منابع مشابه
Centrifuge modelling of long piles subjected to lateral loading with high load eccentricity in sand
In this research paper, five centrifuge lateral loading tests of long piles with a considerable load eccentricity were carried out in the sand to investigate the impacts of the load eccentricity and pile length changes on the lateral behavior of a flexible pile beside the determination of experimental p-y curves. Comparing experimental test results with the recommended API (American Petroleum ...
متن کاملOffshore anchor piles under mooring forces: centrifuge modeling
Offshore anchor piles are seafloor moorings that keep the position of floating structures during a harsh environment. These piles are usually subjected to a wide range of monotonic and cyclic lateral-to-oblique pullout forces. Centrifuge tests were carried out to study the behavior of offshore anchor piles under mooring forces in saturated dense sand. The tests were carried out at different loa...
متن کاملThe Performance of Fly Ash as Fill Material for Embankment Model on Soft Soil
Fly ash is one of coal ashes resulted from power plants using coal to generate electricity. As a result of large utilization of coal, large volumes of coal ash produced as waste material. Direct use of these materials in construction projects, not only provides a promising solution to the disposal problem, but also as an alternative for structural fills material. High shear strength, low compre...
متن کاملOffshore anchor piles under mooring forces: numerical modeling
A parametric study was carried out to study the behavior of offshore anchor piles under mooring forces in dense sand using a three dimensional (3-D) finite element model (FEM). The Mohr–Coulomb plastic model has been used to model the soil, and has been calibrated based on the centrifuge tests discussed in a Ph.D. thesis (published by Ramadan in 2011). The selection of model parameters and comp...
متن کاملDevelopment of Shaft Friction on Driven Piles in Sand and Clay
Despite widespread research effort in recent years, design methods to estimate the shaft resistance of displacement piles continue to rely heavily upon empirical correlations. In an attempt to achieve a more reliable design approach several researchers have assembled databases of instrumented pile load tests and used these to propose new design methods e.g. American Petroleum Institute (API-200...
متن کامل