Validation of Relative Com Displacement in V2 Skating Obtained with Inertial Sensors – a Feasibility Study
نویسندگان
چکیده
INTRODUCTION For precise estimation of the athlete’s CoM during skiing 3D video analysis is required. Such systems are complex to set up and cannot be used on snow for covering large distances. Alternative solutions using inertial sensors have been proposed but were too simple for taking into account arm movement (Myklebust et al., 2015). The aim of this project was to design and validate an inertial sensor based algorithm for estimating CoM displacement where limb motion was also considered.
منابع مشابه
Automatic Identification of Subtechniques in Skating-Style Roller Skiing Using Inertial Sensors
This study aims to develop and validate an automated system for identifying skating-style cross-country subtechniques using inertial sensors. In the first experiment, the performance of a male cross-country skier was used to develop an automated identification system. In the second, eight male and seven female college cross-country skiers participated to validate the developed identification sy...
متن کاملParameterization and reliability of single-leg balance test assessed with inertial sensors in stroke survivors: a cross-sectional study
BACKGROUND AND PURPOSE There are no published studies on the parameterisation and reliability of the single-leg stance (SLS) test with inertial sensors in stroke patients. Purpose: to analyse the reliability (intra-observer/inter-observer) and sensitivity of inertial sensors used for the SLS test in stroke patients. Secondary objective: to compare the records of the two inertial sensors (trunk ...
متن کاملApplications of Inertial Navigation Systems in Medical Engineering
Inertial navigation systems are of the most important and practical systems in determining the velocity, position and attitude of the vehicles and different equipment. In these systems, three accelerometers and three gyroscopes are used to measure linear accelerations and angular velocities of vehicles, respectively. By using the output of these sensors and special inertial algorithms in differ...
متن کاملThe development and validation of using inertial sensors to monitor postural change in resistance exercise.
This research presented and validated a method of assessing postural changes during resistance exercise using inertial sensors. A simple lifting task was broken down to a series of well-defined tasks, which could be examined and measured in a controlled environment. The purpose of this research was to determine whether timing measures obtained from inertial sensor accelerometer outputs are able...
متن کاملMethods for Improving Foot Displacement Measurements Calculated from Inertial Sensors
The use of inertial sensors to measure human movement has recently gained momentum with the advent of low cost micro-electro-mechanical systems (MEMS) technology. These sensors comprise accelerometer and gyroscopes which measure accelerations and angular velocities respectively. Secondary quantities such as displacement can be obtained by integration of these quantities, a method which presents...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016