Protective Performance of Polyaniline-Sulfosalicylic Acid/Epoxy Coating for 5083 Aluminum
نویسندگان
چکیده
Epoxy coatings incorporating different content of sulfosalicylic acid doped polyaniline (PANI-SSA) have been investigated for corrosion protection of 5083 aluminum alloy in 3.5% NaCl solution. The performance of the coatings is studied using a combination of electrochemical impedance spectroscopy (EIS), open circuit potential (OCP), gravimetric tests, adhesion tests, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The results demonstrate that the content of PANI-SSA not only affects the coating compactness and the transportation of aggressive medium, but also has a significant influence on the-based aluminum. The coating with 2 wt. % PANI-SSA exhibits the best corrosion inhibition due to its good protective properties and the formation of a complete PANI-SSA induced oxide layer.
منابع مشابه
Electrochemical evaluation of corrosion protection performance of epoxy/polyaniline-imidazole modified ZnO nanocomposite coating on mild steel
In this research, ZnO nanoparticles modified with imidazole in O-xylene solution and characterized with Fourier transform infrared FTIR spectroscopy. Then, polyaniline-ZnO unmodified and imidazole modified nanocomposites were synthesized via in-situ emulsion polymerization method. The synthesized nanocomposites were characterized by FTIR and scanning electron microscopy SEM. The anti-corrosion ...
متن کاملPreparation of Polyaniline-Clay Nanoadditive and Investigation on Anticorrosion Performance in Epoxy Coating
The corrosion protection of mild steel by a newly developed epoxy-based coating system containing inherently conducting nanopolyaniline-clay as a nanoadditive has been studied. Polyaniline-clay anticorrosion nanoadditive (PCNA) was obtained by the direct mixing method of nanopolyaniline (0.03 wt.%) and organo-modified clay (3 wt.%) at atmospheric pressure, and XRD technique was used to study d-...
متن کاملDirect Electrosynthesis of Polyaniline–Fe2O3 Nanocomposite Coating on Aluminum Alloy 5052 and Its Corrosion Protection Performance
The synthesis of polyaniline- Fe2O3 nanocomposite coating on aluminum Alloy 5052 (AA5052) surface has been investigated by using the galvanostatic method. The anticorrosion performance of polyaniline-Fe2O3 coating was investigated in 3.5% NaCl solution by the open- circuit potential (OCP), Tafel polarization technique and Electrochemical Impedance Spectroscopy (EIS). The corrosion rate of polya...
متن کاملAN IMPROVEMENT TO THE ANTICORROSIVE PROPERTIES OF EPOXY POWDER COATING BY ZINC PHOSPHATE AND ZINC ALUMINUM PHOSPHATE PIGMENTS
Epoxy powder coatings containing zinc aluminum phosphate (ZAP) and zinc phosphate (ZP), which are the 2nd and 1st generation of phosphate-based pigments respectively, were applied to the surface of mild steel sheets. The anticorrosive performances of the coated samples were studied using electrochemical impedance spectroscopy (EIS). Cathodic disbonding resistance and the adhesion performance of...
متن کاملElectrosynthesis of Polyaniline-TiO2 Nanocomposite Films on Aluminum Alloy 3004 Surface and its Corrosion Protection Performance
The direct synthesis of polyaniline-TiO2 nanocomposite coatings on aluminum alloy 3004 (AA3004) surface has been investigated by using the galvanostatic method. The synthesized coatings were characterized by FT-IR, SEM-EDX, SEM and AFM. Optical absorption spectroscopy reveals the formation of the emeraldine oxidation state form of polyaniline-TiO2 nanocomposite. The corros...
متن کامل