Influence of Wall Waviness on Friction and Pressure Drop in Channels
نویسنده
چکیده
An attention has been given to investigate the flow behavior of an incompressible viscous fluid confined in horizontal wavy channels and set in motion due to the movement of the upper waand the pressure differences. The governing equations have been solved analytically as well as numerically subject to the relevant boundary conditions by assuming that the solution consists of two parts: a mean part and a disturbance or perturbed part. For small and moderate Reynolds numbers, the analytical solution for the perturbed part has been found to be in good agreement with the numerical one. The effects of Reynolds number, the pressure gradient parameter, and the undulation wavenumber on friction and pressure drop are found to be quite significant. In addition to the flow behavior for both long and short waves and for large Reynolds numbers, the effect of the wall waviness on friction and pressure drop has been examined for any arbitrary amplitude of the wavy wall.
منابع مشابه
Parametric study of the influence of cooling channel dimensions on PEM fuel cell thermal performance
In a polymer membrane fuel cell more than half of the chemical energy of hydrogen is converted to heat during generation of electricity. This causes an increase in the cell temperature. The Cooling field design has a significant role in cell cooling. The cell's performance and stability are reduced due to inappropriate heat dissipation. In this paper, the cooling flow and heat transfer in cooli...
متن کاملNumerical simulation of nanofluids flow and heat transfer through isosceles triangular channels
Nanofluids are stable suspensions of nanoparticles in conventional heat transfer fluids (base fluids) that exhibit better thermal characteristics compared to those of the base fluids. It is important to clarify various aspects of nanofluids behavior. In order to identify the thermal and hydrodynamic behavior of nanofluids flowing through non-circular ducts, in the present study the laminar flow...
متن کاملModeling heat and mass transfer in laminar forced flow between parallel plates channel imposed to suction or injection
A numerical model is developed to simulate the transport phenomena in the flow channel between parallel plates with porous and non-porous (or impermeable) walls. The continuity and momentum equations were solved first, assuming the wall Reynolds number in the range of with the suction or injection of air at a speed equal to the uniform inlet velocity. The results show that at constant inlet and...
متن کاملGaseous Flows and Heat Transfer through Micro- and Nano-channels
The overall object of this paper is a systematic study of gaseous flows and thermal transport in twodimensional microand nano-channels using direct simulation Monte Carlo (DSMC) method. In the flow study, a validation of DSMC code was conducted by simulating a continuum flow in microchannel and the results show that the discrepancy of friction coefficient from theoretical prediction is well bel...
متن کاملComputational fluid dynamics study and GA modeling approach of the bend angle effect on thermal-hydraulic characteristics in zigzag channels
In the study, the thermal-hydraulic performance of the zigzag channels with circular cross-section was analyzed by Computational Fluid Dynamics (CFD). The standard K-Ꜫ turbulent scalable wall functions were used for modeling. The wall temperature was assumed constant 353 K and water was used as the working fluid. The zigzag serpentine channels with bend angles of 5 - 45° were studied for turbul...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004