At-speed Prototyping of the Protean Architecture
نویسندگان
چکیده
منابع مشابه
The Protean Programmable Network Architecture: Design and Initial Experience
This paper presents Protean, a programmable network architecture for the future Internet. Protean is an event-driven network architecture that allows service providers, applications, and even individual ows to customize the network services, while at the same time providing eecient data paths for ows that use default services. We believe that the Protean approach for injecting and customizing s...
متن کاملCampus Wind Environment Evaluation (Case Study: North China University of Technology)
Wind environment in the populated built area especially in campus is important. This s tudy tes ted57 crossroad spots over of the whole campus in North China University of Technology (NCUT). The data of wind speed and direction were measured at fixed time and fixed place. The average, maximum values as well as the speed variation scale were calculated. Wind comfort criteria were adopted t...
متن کاملHigh Speed Delay-Locked Loop for Multiple Clock Phase Generation
In this paper, a high speed delay-locked loop (DLL) architecture ispresented which can be employed in high frequency applications. In order to design the new architecture, a new mixed structure is presented for phase detector (PD) and charge pump (CP) which canbe triggered by double edges of the input signals. In addition, the blind zone is removed due to the elimination of reset signal. Theref...
متن کاملRapid Prototyping of Distributed Real-Time Embedded Systems Using the AADL and Ocarina
Building Distributed Real-Time Embedded systems requires a stringent methodology, from early requirements capture to full implementation. However, there is a strong link between the requirements and the final implementation (e.g. scheduling, resource dimensioning). Therefore, a rapid prototyping process based on automation of tedious and error-prone tasks (analysis, code generation) is required...
متن کاملExperimental Investigation of Effective Parameters at Laser Sintering the Mixture of Iron and Copper Powder
Optimization of process parameter is one of the ideal goals in laser sintering. The results of this process were measured as output parameters like: density, micro hardening, macro hardening, tension, roughness, stiffness, balling. In this paper, the influence of input parameter such as laser power, scan speed, material powder and etc are surveyed on output parameter like balling affection and ...
متن کامل