Electromechanical aspects of a micro-CHP system
نویسنده
چکیده
Solutions Efficient operation of the gas turbine imposes the demand for very high rotational speed of the generator 240,000 rpm. The permanent magnet machine has been chosen as the generator type since this technology is the most promising for high-speed machines: it offers high efficiency and very high power density at low volumes. A high-frequency power converter is required to enable bi-directional power flow between the generator and grid.
منابع مشابه
مدل فنی- اقتصادی سیستمهای Micro CHP با روشهای عملکردی مختلف
The growing worldwide demand for less polluting forms of energy has led to a renewed interest in the use of micro combined heat and power (CHP) technologies in the residential sector. The operation of micro CHP system results in simultaneous production of heat and power in a single household based on small energy conversion units. The heat produced may be used for space and water heating and po...
متن کاملOptimizing Design of Stand-alone Hybrid Solar Micro-CHP Systems Using LUS Based Particle Swarm Optimization Algorithm
Utilizing the combined cooling, heating and power generation (CHP) systems to produce cooling, heat and electricity is growing rapidly due to their high efficiency and low emissions in commercial and industrial applications. In conventional CHP systems the deficit of the system power can be purchased from the grid. However, this system cannot be used as the standalone application. The hybrid so...
متن کاملRadio Frequency-micro Electromechanical System Switch with High Speed and Low Actuated Voltage
This paper presents a novel RF MEMS (Micro Electromechanical System) fixed-fixed switch for very fast switching. Using the obtained equations, the switching time depends on the stiffness and effective mass of the switch beam so that the switching time will be decreased by higher stiffness (spring constant) and lower effective mass. In new design, the suspension bridge is a three-layer beam so t...
متن کاملPerformance study of a renewable fuel-fed micro humid air turbine
Biogas is a proven and valuable energy source today for combined production of heat and electricity (CHP). In this paper, a novel CHP system installation based on a 500 kW micro humid air turbine (mHAT) in a wastewater treatment plant (WWTP) is presented and discussed. Furthermore, some considerations regarding an appropriate biogas treatment system and heat recovery module is discussed. The re...
متن کاملطراحی و ساخت سامانه همزمان قدرت و حرارت در مقیاس میکرو با استفاده از موتور درونسوز گازسوز
In this study, a micro-CHP system using a gas internal combustion engine with a maximum power of 5 kW of thermal and electricity energy has been designed and fabricated. This system will be able to resolve the consumption of heat and electrical energy for single households. The operation of micro CHP system results indicated that the efficiency of the system was increased about 70% as compared ...
متن کامل