Preparation and Characterization of Blended Films from Quaternized Hemicelluloses and Carboxymethyl Cellulose

نویسندگان

  • Xian-Ming Qi
  • Shi-Yun Liu
  • Fang-Bing Chu
  • Shuai Pang
  • Yan-Ru Liang
  • Ying Guan
  • Feng Peng
  • Run-Cang Sun
چکیده

Utilization of hemicelluloses from biomass energy is an important approach to explore renewable resources. A convenient, quick, and inexpensive method for the preparation of blended films from quaternized hemicelluloses (QH) and carboxymethyl cellulose (CMC) was introduced into this study. QH and CMC solution were first mixed to form homogeneous suspension, and then were dried under vacuum to fabricate the blended films. The FT-IR and XRD results indicated that the linkage between QH and CMC was due to the hydrogen bonding and electrostatic interaction. From the results of mechanical properties and water vapor permeability (WVP), the tensile strength of the blended films increased with the QH/CMC content ratio increasing in appropriate range, and the WVP of the blended films decreased. The maximum value of tensile strength of blend film achieved was 27.4 MPa. In addition, the transmittances of the blended films increased with the decreasing of QH/CMC content ratio. When the weight ratio (QH: CMC) was 1:1.5, the blend film showed the best light transmittance (45%). All the results suggested that the blended films could be used in areas of application in the coating and packaging fields from the good tensile strength, transmittance, and low WVP.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Characterization of a new biodegradable edible film based on Sago Starch loaded with Carboxymethyl Cellulose nanoparticles

Objective(s): Biodegradable film is widely used because it is free from synthetic substances and does not lead to environment pollution. This study aimed to prepare and characterize biodegradable sago starch films loaded with Carboxymethyl Cellulose nanoparticles. Methods: Sago starch films were prepared and plasticized with sorbitol/ glycerol by t...

متن کامل

Preparation and Characterization (Mechanical and Water Absorption Properties) of CMC/PVA/Clay Nanocomposite Films

The aim of this study was to produce Carboxy Methyl Cellulose (CMC) and Poly Vinyl Alcohol (PVA) films and to enhance their properties by reinforcing them with nanoclay particles. Thus, nanocomposite films were prepared with blending of CMC and PVA, as a matrix and several filler loadings of nanoclay particles. The various formulations of nanocomposite films obtained with casting m...

متن کامل

In vitro Antimicrobial Effect of Probiotic Films Based on Carboxymethyl Cellulose-Sodium Caseinate Against Common Food-Borne Pathogenic Bacteria

Introduction: Consumption of appropriate amount of probiotic microorganisms via food products have health benefits on the host. In recent years, there has been a significant increase in research on the characterization and verification potential use of probiotic films in food industry. The aim of the current study was to investigate in vitro antimicrobial property of p...

متن کامل

Preparation and characterization of collagen food packaging film

Collagen was extracted from the skin of pigs, and blended with sodium alginate, starch, and sodium carboxymethyl cellulose. Food packaging films were obtained by crosslinking the blend with glutaraldehyde. Fourier transform infrared spectroscopy (FT-IR), SEM and TGA analyses were used to characterize the resulting films. A strong hydrogen bonding was detected between the composite film molecule...

متن کامل

Synthesis and Characterization of ‎Carboxymethyl Cellulose/Polystyrene ‎Core-Shell Nanoparticles by Miniemulsion ‎Polymerization

The first stage to have access to a reservoir is the drilling operation. The proper development of this operation plays a major role in increasing productivity. It must be pointed out that the drilling fluid (mud) is pivotal in achieving this objective. Among these fluids, water-based fluids are the most common ones, which have been utilized to drill approximately 80% of all wells and are m...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 9  شماره 

صفحات  -

تاریخ انتشار 2015