Selection of optimum sorption isotherm

نویسنده

  • Yuh-Shan Ho
چکیده

[1] Seinfeld JH. Air pollution: physical and chemical fundamentals. New York: McGraw Hill; 1975. p. 1–26. [2] Arthur CS. In: Measuring, monitoring, and surveillance of air pollution, vol. 3. New York: Academic Press; 1976. p. 183–305. [3] Tseng HH, Wey MY, Liang YS, Chen KH. Catalytic removal of SO2, NO and HCl from incineration flue gas over activated carbonsupported metal oxides. Carbon 2003;41(5):1079–85. [4] Park SJ, Jang YS. Interfacial characteristics and fracture toughness of electrolytically Ni-plated carbon fiber-reinforced phenolic resin matrix composites. J Colloid Interface Sci 2001;237(1): 91–7. [5] Ryu SK, Kim SY. Physical properties of silver-containing pitchbased activated carbon fibers. Carbon 1999;37(10):1619–25. [6] Liu S, Huang W, Chen S, Avivi S, Gedanken A. Synthesis of X-ray amorphous silver nanoparticles by the pulse sonoelectrochemical method. J Non-Cryst Solids 2001;283(3):231–6.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Equilibrium Study of Methylene Blue Sorption from Aqueous Solutions by a Low-cost Waste Material: Almond Peel

In the present work, the usefulness of almond peel as a sorbent material has been investigated for the removal of methylene blue from synthetic aqueous solutions in batch conditions. Isotherm of dye sorption was measured. The influence of different experimental parameters such as: almond peel mass, particles size, temperature, initial pH of solution and NaCl concentration on this isotherm was s...

متن کامل

Kinetics and Thermodynamic Study of Nitrate Adsorption on Granular Ferric Hydroxide

This study explored the feasibility of using granular ferric hydroxide as adsorbent for the removal of NO3-N. Optimum conditions for NO3-N removal were found to be pH 5.0 and equilibrium time 80min. The equilibrium sorption isotherm was better described by Langmuir sorption isotherm model. The maximum sorption capacity of granular ferric hydroxide was 4.254mg/g at 298K. A comparison of four kin...

متن کامل

Biomass of Mucor Heimalis for the Biosorption of Cadmium from Aqueous Solutions: Equilibrium and Kinetic Studies

The present study deals with the utilization of a cellulosic material, i.e. fungal biomass of Mucor heimalis, for the removal of cadmium from aqueous solution in a batch system. Effects of various parameters such as pH, biomass dosage, contact time, and initial metal concentrations were investigated. The sorption of cadmium followed pseudo-secondorder rate kinetics (R=0.998). Intraparticle diff...

متن کامل

Sorption Performance of Live and Heat-Inactivated Loofa-Immobilized Phanerochaete chrysosporium in Mercury Removal from Aqueous Solution

The sorption behavior of loofa-immobilized Phanerochaete chrysosporium mycelia in two forms, Live (L) and Heat-Inactivated (HIA), was studied for the removal of Hg2+ ions from aqueous solution. Using the Langmuir isotherm, the two key parameters for the sorption performance, qm and the coefficient b, were obtained; the qm ...

متن کامل

Kinetic studies on bioadsorption of arsenate from aqueous solutions using chitosan

Arsenic, one of the most toxic and dangerous elements in the environment affecting millions of people around the world, is associated with several diseases. In this pilot study, we investigated removal of arsenate from aqueous solutions using chitosan under the influences of initial arsenic ion concentrations, pH, contact time, and adsorbent dosages of chitosan. In order to assess the sorption ...

متن کامل

Sorption Study of Acid Blue in Aqueous Solution by Synthetic Poly Urea-Formaldehyde

Poly urea-formaldehyde was synthesized simply and rapidly from urea and formaldehyde by condensation polymerization and studied for the sorption of trace acid blue from aqueous solution. The optimum pH value for sorption of the acid blue was 4. Experimental results showed that the sorption capacity of poly urea-formaldehyde for acid blue was determined. The synthetic polymer can be reused for 5...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004