Connecting Your Receiver to the Antenna
نویسنده
چکیده
منابع مشابه
طراحی SLB با استفاده از چند آنتن کمکی و رویکرد تئوری آشکارسازی
Sidelobe blanking (SLB) is a technique employed in radar signal processing to inhibit detection when an unwanted signal enters the radar receiver through antenna sidelobes. For this purpose, an auxiliary antenna and receiver channel are used in the radar system. Comparing the main antenna and auxiliary antenna signal strength, a decision is made for blanking the main channel output. In this pap...
متن کاملبررسی تأثیر فاصله‌ی بین آنتن‌ها در فرستنده و گیرنده بر روی ظرفیت کانال MIMO
In this paper, the spatial MIMO channel modeling (SCM) is introduced and the required parameters for this modeling are studied. Then, the MIMO channel gains and capacity are analyzed. The transmitter and receiver antenna patterns are also analyzed. Next, we are focused on the effects of the transmitter and receiver antenna arrays separations, the arrays length, and the angles spread on the ante...
متن کاملGPS Antenna Height and Its Influence on Pseudorange Multipath
The GPS antenna is the connecting component between the GPS satellite and the GPS receiver. Its function is to transfer the satellite signal propagation to the receiver with minimum interruption. A satisfactory process is expected to result in an accurate and reliable performance of the GPS receiver. Multipath error is a dominant error source connected with GPS positioning. Mitigation of such e...
متن کاملSignal Optimization During Radio Links Between a Transmitter and a Receiver Located in Adjacent Material Media with Differing Optical Densities (TECHNICAL NOTE)
Signal optimization is affected during radio links between a transmitter and a receiver located in adjacent material media with differing optical densities. The optimization is carried out via the automated control theory method. The radio signal obtained after the optimization is coordinated with the two media's electrical characteristics simultaneously; and this enables low power and small an...
متن کاملVerify and Visualize Your TD-LTE Beamforming Signals
A common theme in modern wireless communications is the use of multi-antenna techniques , such as beamforming and spatial multiplexing in order to improve the cell capacity and throughput. A common problem encountered by customers today, is the inability to verify and visualize the signal at the RF antenna. This white paper will summarize multi-antenna techniques, before introducing the concept...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1999