Preparation and Characterization of Crosslinking Monomers Grafted Gelatin Films by Photocuring

نویسندگان

  • Haydar U. Zaman
  • Mubarak A. Khan
  • Ruhul A. Khan
چکیده

Thin films of were prepared by casting and its tensile properties like tensile strength (TS) and elongation at break (Eb%) were studied. The gelatin films were procured with two types of monomers such as 5% ethylene glycol (EG) and 5% ethylene glycol dimethacrylate (EGDMA) to increase the tensile properties. Five percent of monomer solutions were prepared in MeOH along with 2% photoinitiator; Irgacure-651. Soaking time and UV-radiation intensities were optimized with extent of polymer loading (PL) and tensile properties of the cured films. Comparing the properties of EG and EGDMA treated gelatin film, EG showed the best performance. The EG-cured gelatin film with 5 min soaking time showed the highest tensile strength 47.3 MPa and elongation at break 28.4%. The water uptake was determined for raw film 500.13%, EG grafted gelatin film 375.34% and EGDMA grafted film 412.87%.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Preparation and Characterization of Novel Bionanocomposite Based on Tapioca Starch/Gelatin/Nanorod-rich ZnO: Towards Finding Antimicrobial Coating for Nuts

The effects of zinc oxide nanorod on the barrier, sorption isotherm and antibacterial properties of tapioca starch/bovine gelatin Bionanocomposite films were investigated. The nanorod-rich ZnO (ZnO-N) was homogenized by sonication and incorporated into tapioca starch/bovine gelatin solutions at different concentrations (e.g. 0.5, 2, and 3.5% w/w dried solid). Incorporation of 3.5% of nanopartic...

متن کامل

Synthesis, characterization and swelling behavior investigation of gelatin-g-Poly(Acrylic Acid-co-Itaconic Acid)

A novel pH-responsive superabsorbent hydrogel based on gelatin was prepared through crosslinking copolymerization of poly (acrylic acid) and poly (itaconic acid). The copolymerization conditions including monomers, initiator, gelatin and crosslinker concentration, reaction temperature, and neutralization percent were systematically optimized to achieve a hydrogel with swelling capacity as high ...

متن کامل

Controlled Antibiotic Delivery by Gelatin Nanospheres: Optimization, Characterization and Antibacterial Evaluation

The present work focuses on preparation and characterization of erythromycin loaded gelatin nanoparticles through nanoprecipitation method. The procedure consists of the addition of the aqueous gelatin solution to the non-solvent phase containing Lutherol F127. Three different measures of cross-linker and polymer concentration were also examined, and the optimum concentration was found. The mor...

متن کامل

Preparation of Water-Based Alkyd/Acrylic Hybrid Resins

Alkyd resins are amongst the most important and widely used resins in coating sectors. In this communication we report on preparation of alkyd resins emulsified by grafted acrylic resins on their fatty acid moieties. Both high-shear mechanical homogenizer and ultra-sonic sonicator were used step-wise to disperse the alkyd resin and acrylic based monomers in aqueous media. The resins are of nano...

متن کامل

Synthesis and Characterization of Biodegradable Hemostat Gelatin Sponge for Surgery Application

     Production and characterization of soft cross-linked gelatin sponge by using glutaraldehyde for blood hemostasis application, is the goal of this study. Biodegradable hydrogels were prepared through crosslinking of gelatin with glutaraldehyde followed by freeze drying. The effects of gelatin concentration, amount of crosslink agent and freeze drying temperature on mechanical properties and...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013