Simulation research on rail transit traction grid voltage stabilization and its energy saving effects based on BESS
نویسندگان
چکیده
In order to realize voltage stabilization and energy saving of rail transit traction supply system, a Li-ion battery energy storage system (BESS) is presented for application in the DC traction grid to reuse the braking energy of the vehicles. According to the models of traction substation, power lines and vehicles, the braking energy saved by BESS is calculated in MatLAB/Simulink, and the performances of stabling the DC grid voltage are simulated with BESS and braking resistor respectively. By comparing the simulation results, it shows that the BESS could achieve good effects of DC grid voltage stabilization not only during the braking process but also during the traction process of the vehicles. Furthermore, the BESS is tested and verified to absorb and recycle the braking energy availably; therefore, it could well meet the purposes of clean energy and green travel of rail transit.
منابع مشابه
Reactive and Active Power Control of Grid WECS Based on DFIG and Energy Storage System under both Balanced and Unbalanced Grid Conditions
This paper focuses on improving the active and reactive power control of Wind Energy Conversion System (WECS) by employing the Battery Energy Storage System (BESS) and controlling the frequency and voltage regulation instantaneously. The proposed power control scheme is composed of two control loops so that they are implemented and designed for active power control and controlling the reactive ...
متن کاملMulti-Train Energy Saving for Maximum Usage of Regenerative Energy by Dwell Time Optimization in Urban Rail Transit Using Genetic Algorithm
Abstract: With its large capacity, the total urban rail transit energy consumption is very high; thus, energy saving operations are quite meaningful. The effective use of regenerative braking energy is the mainstream method for improving the efficiency of energy saving. This paper examines the optimization of train dwell time and builds a multiple train operation model for energy conservation o...
متن کاملSupercapacitor State Based Control and Optimization for Multiple Energy Storage Devices Considering Current Balance in Urban Rail Transit
The use of supercapacitors (SCs) to store regenerative braking energy from urban rail trains is able to achieve a good energy saving effect. This paper analyzes the current balance method of stationary energy storage devices (ESDs). At the beginning of the paper, the mathematical model of the DC traction power system, which includes trains, ESDs and traction substations, is established. Next, b...
متن کاملReview on the Traction System Sensor Technology of a Rail Transit Train
The development of high-speed intelligent rail transit has increased the number of sensors applied on trains. These play an important role in train state control and monitoring. These sensors generally work in a severe environment, so the key problem for sensor data acquisition is to ensure data accuracy and reliability. In this paper, we follow the sequence of sensor signal flow, present senso...
متن کاملMaximum Safety Regenerative Power Tracking for DC Traction Power Systems
Direct current (DC) traction power systems are widely used in metro transport systems, with running rails usually being used as return conductors. When traction current flows through the running rails, a potential voltage known as “rail potential” is generated between the rails and ground. Currently, abnormal rises of rail potential exist in many railway lines during the operation of railway sy...
متن کامل