Effect of Material and Configuration of

نویسندگان

  • Katuma KATO
  • Kiyoshi KAKUTA
  • Hideo OGURA
چکیده

The aim of this study was to investigate the effect of antagonist material and configuration on combined wear, which was produced by alternating toothbrush wear and simulated occlusal wear on one specimen. Worn volume and maximum worn depth comparisons were done using two antagonist materials (steel and ceramic) and two antagonist configurations (flat and round). For the material factor, worn volume by the ceramic antagonist was greater than that by steel antagonist in the combined wear test. For the configuration factor, the round ceramic antagonist induced a greater volume loss of the resin composite. As for maximum worn depth, both the material and configuration of antagonist were influencing factors in the combined wear test — where the round ceramic antagonist induced a deeper wear of the resin composite. Based on the results of this study, we concluded that a round ceramic antagonist is suitable to be used for evaluating the wear behavior of resin composites.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modification of exponential based hyperelastic strain energy to consider free stress initial configuration and Constitutive modeling

In this research, the exponential stretched based hyperelastic strain energy was modified to provide the unstressed initial configuration. To this end, as the first step, the model was calibrated by the experimental data to find the best material parameters. The fitting results indicated material stability in large deformations and basic loading modes. In the second step, the initial pseudo str...

متن کامل

Effect of Carbon Nanotube Geometries on Mechanical Properties of Nanocomposite Via Nanoscale Representative Volume Element

Predicting the effective elastic properties of carbon nanotube-reinforced nanocomposites is of great interest to many structural designers and engineers for improving material and configuration design in recent years. In this paper, a finite element model of a CNT composite has been developed using the Representative volume element (RVE) to evaluate the effective material properties of nanocomp...

متن کامل

Effects of Material and Geometrical Parameters on the Free Vibration of Sandwich Beams

The aim of present study is to investigate the effect of various parameters such as length, thickness, density, shear modulus of the core and Young modulus of skins for various boundary conditions:  clamped-free and simply supported. By applying the model of Khalili et al for frees vibration analysis of sandwich beams by using finite element methods. Where, the core density is taken on consider...

متن کامل

Second Harmonic Reduction of Traveling Wave Tube Amplifier Using Ferrite Material

Traveling Wave Tubes (TWTs) consist of different elements. The most important element of TWT is the RF circuit. RF circuits in helix TWTs need a dielectric support to hold the helix; this support also has an effect in electromagnetic properties of RF circuits. A novel dielectric support is proposed to reduce the second harmonic of helix TWTs. The dielectric support in this structure consists of...

متن کامل

Effect of Coating Materials on the Fatigue Behavior of Hip Implants: A Three-dimensional Finite Element Analysis

This study aims to validate, using finite element analysis (FEA), the design concept by comparing the fatigue behavior of hip implant stems coated with composite (carbon/PEEK) and polymeric (PEEK) coating materials corresponding to different human activities: standing up, normal walking and climbing stairs under dynamic loadings to find out which of all these models have a better performance in...

متن کامل

An Investigation of Temperature Effects on Solar Photovoltaic Cells and Modules

The solar photovoltaic (PV) systems are facing serious problems due to unavoidable losses in their system, leads to more devation of output power from the input power level. This effect is known as a mismatch effect and is available in PV systems. Many losses are encountered in PV system and it is difficult to minimize such losses. In this paper, the influence of thermal effect on the solar PV ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009