Simultaneous Determination of Oxyclozanide and Levamisole by Spectrophotometric and Chromatographic Methods

Article history: Received on: 20/05/2014 Revised on: 05/06/2014 Accepted on: 11/07/2014 Available online: 27/09/2014 Three simple, accurate and sensitive methods were developed for simultaneous determination of oxyclozanide and levamisole. Method (A) was depending on zero-order absorption spectrophotometry for measuring oxyclozanide at 300 nm and derivative ratio spectrophotometry for levamisole using oxyclozanide as a divisor, then measuring the peak amplitude at 246 nm. Method (B) was TLC method, using silica gel 60 F254 plates; the optimized mobile phase was ethyl acetate/ methanol/ ammonium hydroxide 33% (8:2:0.2 by volume). The spots were scanned densitometrically at 300 nm for oxyclozanide and 220 nm for levamisole. Method (C) was an HPLC method, performed on C18 column using acetonitrile/ methanol/ 0.05M potassium dihydrogen phosphate (60:20:20 by volume), the pH was adjusted to 3.5±0.2 with ortho-phosphoric acid as a mobile phase with a flow rate of 1 ml/min. Detection was performed at 220 nm. Linearity ranges were 5 – 40 μg/ml of oxyclozanide and levamisole for method (A), 1 – 6 μg/band of oxyclozanide and 2 10 μg/ band of levamisole for method (B) and 0.5 – 10 μg/ml of both drugs for method (C), the mean percentage recoveries were 100.21±0.844% for oxyclozanide and 99.53±0.920% for levamisole in case of method (A), 99.72±1.348% for oxyclozanide and 99.14±1.277% for levamisole in case of method (B) and 99.81±0.852% for oxyclozanide and 100.20±0.886% for levamisole in case of method (C). The proposed methods were found to be specific for both drugs in their binary mixture. Statistical comparison between the results obtained by these methods and the manufacturer’s method for oxyclozanide and the official method for levamisole was done, and no significance difference was observed.