On the Topotactic Transformation of Ti2AlC into a Ti-C-O-F Cubic Phase by Heating in Molten Lithium Fluoride in Air
نویسندگان
چکیده
Herein we report on the formation of a Ti-C-O-F phase via the topotactic transformation of Ti2AlC by immersion in molten lithium fluoride, LiF, at 900°C in air for 2 h. The Al diffuses out of the structure and reacts with LiF to form Li3AlF6. X-ray diffraction, Raman spectroscopy, optical, scanning and transmission electron microscopy with energy-dispersive spectroscopy showed the selective etching of Al from the structure and the formation of a cubic, rock-salt, TiC-O-F phase. The transformation is topotaxial, involves de-twinning of the hexagonal Ti2AlC structure and results in domains that are of the order of 10 nm. The reaction rate is significantly higher when the reaction is carried out in air than when it is carried out in
منابع مشابه
Effect of Calcination Temperature and Li / TFA Molar Ratio on Morphology and Phase of Lithium Fluoride Nanoparticles Produced by Fluorolytic Sol-Gel Method
In this research, synthesis of lithium fluoride (LiF) nanoparticles by fluorolytic sol-gel method has been studied. Moreover, the effect of lithium ion to fluorine source molar ratio and calcination temperature on particle size and phase of LiF nanoparticles were investigated. Lithium acetate (C2H3LiO2), trifluoroacetic acid (TFA), ethylene glycol monobutyl ether and oleic acid were used as so...
متن کاملStructure of a new bulk Ti5Al2C3 MAX phase produced by the topotactic transformation of Ti2AlC
Upon annealing cold-pressed Ti2AlC, -325 mesh powders, at 1500 °C for 8 h in argon, the resulting partially sintered sample contained 43(±2) wt.% of the layered ternary carbide Ti5Al2C3. Herein, the X-ray powder diffraction pattern of Ti5Al2C3 is reported for the first time. Its structure and stoichiometry are confirmed through high-resolution transmission electron microscopy. This phase has a ...
متن کاملتولید دزیمتر LiF: Mg, Ti و مقایسه پاسخ آن با دزیمتر (LiF: Mg, Ti (TLD-100 ساخت شرکت هارشا در برابر پرتوهای گاما
Thermoluminescence dosimeters are small tablets used with 3. 2*3. 2*0. 9mm^3 for measurement of received dose from radioactive various beams. The most common dosimeter is TLD-100 which is lithium-fluoride family and this dosimeter contain magnesium impurities. In this study, first lithium-flouride powder was mixed with titanium and controlled atmosphere samples were heated. After measuring ...
متن کاملTRANSFORMATION BEHAVIOR OF NiTi SHAPE MEMORY ALLOYS TREATED BY THERMOMECHANICAL PROCESSING USING DSC
Abstract: In the present study the effect of thermomechanical treatment (cold work and annealing) on the transformation behavior of NiTi shape memory alloys was studied. Differential scanning calorimetry was used to determine transformation temperature and its relation to precipitates and defects. Three alloys including Ti-50.3at.% Ni, Ti-50.5at.% Ni (reclamated orthodontic wires) and 50.6at...
متن کاملEFFECT OF FABRICATION PARAMETERS ON SYNTHESIS OF Ti2AlC AND Ti3AlC2MAX PHASES BY MASHS
Mechanically Activated Self-propagating High temperature Synthesis (MASHS) is the method which is used to promote self-propagating synthesis by increasing activity of reactants and increase the purity of products. In this study Ti 2 AlC and Ti3AlC2 max phases were synthesized by using mechanically activated self-propagating high temperature synthesis (MASHS) and samples reactivity and phase str...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012