CALCULATION OF TUNING PARAMETERS FOR VIBRATION CONTROL USING LabVIEW
ثبت نشده
چکیده
Vibration control of rotating machinery is tougher and a challenging challengerical technical problem. There are two major categories of vibration control techniques for rotating machinery such as direct control using vibration isolators and balancing control using vibration dampers. This chapter presents the simulation of a PID control scheme and calculation of tuning parameters. These parameters have been derived by using certain fuzzy rules. In this research, obtaining the tuning parameters were formulated by using a change in error for different continuous control mode gains.
منابع مشابه
Passive Vibration Control for Fatigue Damage Mitigation in Steel Jacket Platforms
Considering the stress cycles in the joints and members due to wave induced forces on offshore platforms, fatigue analysis is therefore one of the most important analyses in the offshore platforms design. Although most of the steel jacket type platforms are designed and located in areas with relatively high ratios of operational sea-states, for maximum environmental events, would have acceptabl...
متن کاملLabVIEW implementation of an enhanced nonlinear PID controller based on harmony search for one-stage servomechanism system
This paper presents a practical implementation for a new formula of nonlinear PID (NPID) control. The purpose of the controller is to accurately trace a preselected position reference of one stage servomechanism system. The possibility of developing a transfer function model for experimental setup is elusive because of the lack of system data. So, the identified model has been developed via gat...
متن کاملLabVIEW Perturbed Particle Swarm Optimization Based Approach for Model Predictive Control Tuning
In this paper, a new Model Predictive Controller (MPC) parameters tuning strategy is proposed using a LabVIEW-based perturbed Particle Swarm Algorithm (pPSA). This original LabVIEW implementation of this metaheuristic algorithm is firstly validated on some test functions in order to show its efficiency and validity. The optimization results are compared with the standard PSO approach. The param...
متن کاملLabVIEW Based DC Motor and Temperature Control Using PID Controller
LabVIEW is a graphical programming language. LabVIEW provides the flexibility of integration of data acquisition software/hardware with the process control application software for automated test and measurement applications. In this paper, an effort is made to control the speed of the DC motor and figure out the design process of a PID temperature controlling system of the electromagnetic oven...
متن کاملA Design of a PID Self-Tuning Controller Using LabVIEW
In this paper a trial has been made to design a simple self-tuning LabVIEW-based PID controller. The controller uses an open –loop relay test, calculates the tuned parameters in an open loop mode of operation before it updates controller parameters and runs the process as a closed-loop system. The controller reacts on a persistent offset error value as a result of load disturbance or a set poin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014