The Effect Of Osteogenesis on Newly Fabricated Cu-bearing Stainless Steel
نویسندگان
چکیده
منابع مشابه
Enhanced bone formation on newly fabricated Cu-bearing stainless steel
313 ©2014 Society for Biomaterials
متن کاملNano-copper-bearing stainless steel promotes fracture healing by accelerating the callus evolution process
Treatment for fractures requires internal fixation devices, which are mainly produced from stainless steel or titanium alloy without biological functions. Therefore, we developed a novel nano-copper-bearing stainless steel with nano-sized copper-precipitation (317L-Cu SS). Based on previous studies, this work explores the effect of 317L-Cu SS on fracture healing; that is, proliferation, osteoge...
متن کاملMicrostructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting
Precipitation-hardened (PH) stainless steels have been widely used as structural materials and related applications in marine environments, power plants (light-water and pressurized water reactors), and chemical industries because of their good mechanical properties and corrosion resistance at typical service temperatures below 300oC. 17-4 PH (A1S1630) stainless steel (15–17.5 Cr, 3–5 Ni, 3–5 C...
متن کاملEffect of the TLP process parameters on microstructure, mechanical properties and corrosion resistance of 316L stainless steel to pure commercial titanium joint with pure copper interface
In this research, effect of time and temperature of TLP process on the microstructure, mechanical properties and corrosion resistance of CP-Ti to 316L stainless steel joint evaluated. For this purpose pure copper foil with 100 µm thickness was used as interlayer and joining process carried out at 950˚C, 1000˚C and 1050˚C and for 90, 120 and 150 minutes. After the joining process, shear and micr...
متن کاملEffect of the TLP process parameters on microstructure, mechanical properties and corrosion resistance of 316L stainless steel to pure commercial titanium joint with pure copper interface
In this research, effect of time and temperature of TLP process on the microstructure, mechanical properties and corrosion resistance of CP-Ti to 316L stainless steel joint evaluated. For this purpose pure copper foil with 100 µm thickness was used as interlayer and joining process carried out at 950˚C, 1000˚C and 1050˚C and for 90, 120 and 150 minutes. After the joining process, shear and micr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014