RFC 4561 Definition of RRO Node - Id Sub -
نویسندگان
چکیده
In the context of MPLS TE Fast Reroute, the Merge Point (MP) address is required at the Point of Local Repair (PLR) in order to select a backup tunnel intersecting a fast reroutable Traffic Engineering Label Switched Path (TE LSP) on a downstream Label Switching Router (LSR). However, existing protocol mechanisms are not sufficient to find an MP address in multi-domain routing networks where a domain is defined as an Interior Gateway Protocol (IGP) area or an Autonomous System (AS). Hence, the current MPLS Fast Reroute mechanism cannot be used in order to protect inter-domain TE LSPs from a failure of an Area Border Router (ABR) or Autonomous System Border Router (ASBR). This document specifies the use of existing Record Route Object (RRO) IPv4 and IPv6 sub-objects (with a new flag defined) thus defining the node-id sub-object in order to solve this issue. The MPLS Fast Reroute mechanism mentioned in this document refers to the "Facility backup" MPLS TE Fast Reroute method.
منابع مشابه
Initial IPv6 Sub-TLA ID Assignments
This document defines initial assignments of IPv6 Sub-Top-Level Aggregation Identifiers (Sub-TLA ID) to the Address Registries. It is intended as technical input to the Internet Assigned Numbers Authority (IANA) from the Internet Engineering Task Force (IETF) Internet Protocol Next Generation (IPNG) and Next Generation Transition (NGTRANS) working groups, as an input to the process of developin...
متن کاملNode-ID Based Resource Reservation Protocol (RSVP) Hello: A Clarification Statement
Use of Node-ID based Resource Reservation Protocol (RSVP) Hello messages is implied in a number of cases, e.g., when data and control planes are separated, when TE links are unnumbered. Furthermore, when link level failure detection is performed by some means other than exchanging RSVP Hello messages, use of a Node-ID based Hello session is optimal for detecting signaling adjacency failure for ...
متن کاملRFC 6286 AS - Wide Unique BGP ID for BGP - 4 June 2011 2
To accommodate situations where the current requirements for the BGP Identifier are not met, this document relaxes the definition of the BGP Identifier to be a 4-octet, unsigned, non-zero integer and relaxes the "uniqueness" requirement so that only Autonomous-Systemwide (AS-wide) uniqueness of the BGP Identifiers is required. These revisions to the base BGP specification do not introduce any b...
متن کاملRFC 6925 The Relay Agent ID Sub - Option April 2013 3 . Example Use Cases 3
This document defines a new Relay Agent Identifier sub-option for the Dynamic Host Configuration Protocol (DHCP) Relay Agent Information option. The sub-option carries a value that uniquely identifies the relay agent device within the administrative domain. The value is normally administratively configured in the relay agent. The suboption allows a DHCP relay agent to include the identifier in ...
متن کاملDefinition of an IS-IS Link Attribute Sub-TLV
This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited. Abstract This document defines a sub-TLV called "Link-attribu...
متن کامل