Dual-band Power Amplifier for Wireless Communication Base Stations
نویسنده
چکیده
منابع مشابه
Selecting High-Linearity Mixers for Wireless Base Stations
Today’s communication systems make strong demands on both receiver sensitivity and large-signal performance (dynamic range). When selecting components for a new design, therefore, it behooves the designer to focus on the performance of each one with regard to these requirements. In particular, this article deals with mixers and the basic parameters specified in their data sheets. The communicat...
متن کاملModified Doherty Power Amplifier for Wider Band
Wireless communication system are developing rapidly, due to which new standards like WIMAX and 4G Long Term Evaluating(LTE) with a purpose of achieving high data rate result in high end applications such as high speed internet, video conferences and broadband width. These applications require mobile base stations at the transmitter as well as at receiver (T/R) to support features like multiple...
متن کاملDual Band Slotted Patch Antenna for On/Off-body Communication
Body Centric Wireless Communication (BCWC) has been topic of much research in recent years. In this manuscript, a novel low-cost microstrip patch antenna is designed for on-/off-body communication with a dual-band operation. The proposed structure exhibits a monopole-like radiation pattern at 2.45 GHz and a broadside radiation at 4.8 GHz, simultaneously. Lateral dimensions of 42 mm × 46 mm and ...
متن کاملDesign of a High Range, High Efficiency Spread Spectrum Transmitter for Audio Communication Applications
This work proposes a direct sequence spread spectrum transmitter with high transmission range and efficiency for audio signals. It is shown that by choosing high process gain for spread spectrum signal the data could reach a range of 55km in the 2.4GHz ISM band. By employing a light modulation scheme, we have a relaxed SNR requirement for having a low bit error rate (BER) which translates to re...
متن کاملNon-linear modeling, analysis, design and simulation of a solid state power amplifier based on GaN technology for Ku band microwave application
A new non-linear method for design and analysis of solid state power amplifiers is presented and applied to an aluminum gallium nitride, gallium nitride (AlGaN-GaN) high electron-mobility transistor (HEMTs) on silicon-carbide (SiC) substrate for Ku band (12.4 13.6 GHz) applications. With combining output power of 8 transistors, maximum output power of 46.3 dBm (42.6 W), PAE of 43% and linear ga...
متن کامل