Two-Way Active Measurement Protocol (TWAMP) Reflect Octets and Symmetrical Size Features
نویسندگان
چکیده
This memo describes two closely related features for the core specification of the Two-Way Active Measurement Protocol (TWAMP): an optional capability where the responding host returns some of the command octets or padding octets to the sender, and an optional sender packet format that ensures equal test packet sizes are used in both directions.
منابع مشابه
Ericsson Two-Way Active Measurement Protocol (TWAMP) Value-Added Octets
This memo describes an extension to the Two-Way Active Measurement Protocol (TWAMP). Specifically, it extends the TWAMP-Test protocol, which identifies and manages packet trains, in order to measure capacity metrics like the available path capacity, tight section capacity, and UDP delivery rate in the forward and reverse path directions.
متن کاملEngineering Task Force ( IETF ) A
This memo describes two closely related features for the core specification of the Two-Way Active Measurement Protocol (TWAMP): an optional capability where the responding host returns some of the command octets or padding octets to the sender, and an optional sender packet format that ensures equal test packet sizes are used in both directions.
متن کاملA Two-Way Active Measurement Protocol (TWAMP)", RFC 5357
The One-way Active Measurement Protocol (OWAMP), specified in RFC 4656, provides a common protocol for measuring one-way metrics between network devices. OWAMP can be used bi-directionally to measure one-way metrics in both directions between two network elements. However, it does not accommodate round-trip or two-way measurements. This memo specifies a Two-Way Active Measurement Protocol (TWAM...
متن کاملIndividual Session Control Feature for the Two-Way Active Measurement Protocol (TWAMP)
The IETF has completed its work on the core specification of TWAMP-the Two-Way Active Measurement Protocol. This memo describes an OPTIONAL feature for TWAMP, that gives the controlling host the ability to start and stop one or more individual test sessions using Session Identifiers. The base capability of the TWAMP protocol requires all test sessions that were previously requested and accepted...
متن کاملTCP Use and Performance on Internet 2
Sampled NetFlow data from a core Internet2 router are analyzed to characterize the current use and performance of Internet2, with particular emphasis on bulk TCP transfers. The distribution of throughput, transfer size, duration, and average packet size for 48,301 observed bulk TCPs is presented. The top 10% of bulk transfer TCPs achieved throughputs of 3.9 Mbps or greater, while the top 1% of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- RFC
دوره 6038 شماره
صفحات -
تاریخ انتشار 2010