A numerical study of the aspiration efficiency of a thin-walled sampler facing the wind for high velocity ratios
نویسنده
چکیده
• This is the author's version of a work that was accepted for publication in the Journal of Aerosol Science. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published at: http://dx.doi.org/10.1016/j.jaerosci.2004.07.010
منابع مشابه
Performance Characteristics of Personal Samplers in Still and Moving Air
Personal samplers or in general blunt body samplers are widely used in occupational hygiene for collecting air contaminants in the work environments. This work is part of an ongoing research into the performance evaluation of personal samplers, particularly in terms of their aerodynamic properties. Velocity profiles have been measured around and within typical cylindrical sampling devices, ...
متن کاملبررسی آزمایشگاهی کارایی نسبی تله‌های رسوب‌گیر ریزگرد MWAC، MDCO،CDS و CDSC
Quantitative measurement of aeolian dust may help properly monitor and control the wind erosion. The aim of this study was to evaluate the efficiencies of four aeolian dust samplers including the modified Wilson and Cooke sampler (MWAC), cyclone dust sampler with cone (CDSC), cyclone dust sampler (CDS), and marble dust collector (MDCO) in comparison with the big spring number eight sampler (BSN...
متن کاملInvestigation of the effect of buckling initiator on energy absorption of thin-walled circular tubes by using of numerical simulation
Cylindrical thin-walled tubes due to construction and easy installation, high energy absorption capacity are used in the automotive industry as an impact energy absorber. However, the main weakness of cylindrical tubes is in the high initial peak load. Therefore, in this paper, to overcome this weakness, a buckling initiator is used at the top of the tube. This buckling initiator is a steel rod...
متن کاملThe Effect of Normal Anisotropy on Thin-Walled Tube Bending
Thin-walled tube bending has common applications in the automobile and aerospace industries. The rotary-draw-bending method is a complex physical process with multi-factor interactive effects and is one of the advanced tube forming processes with high efficiency, high forming precision, low consumption and good flexibility for bending angle changes. However, it may cause a wrinkling phenomenon,...
متن کاملBuckling of Stiffened Thin Walled Cylindrical Shells due to Global Shear
Thin walled cylindrical shells are important components of industrial structures such as liquid storage tanks, silos, etc. Shell buckling is usually a major failure mode of thin walled shells under extreme loads such as earthquakes. Longitudinal and radial stiffeners are generally used in order to increase buckling capacity of thin walled shells. During an earthquake, cylindrical shells may exp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017