Optimization of Reliability Verification Test Strategies
ثبت نشده
چکیده
1.0 INTRODUCTION Reliability verification testing is almost always included as a quality specification for new products. A typical example in the automotive industry is to demonstrate 95% reliability at 100,000 miles with 90% confidence. Obviously, in this case some type of accelerated testing is required. It is infeasible to accumulate 100,000 miles or more on an automobile at a normal rate; the design would be 10 years out of date before testing is completed.
منابع مشابه
Combining Scenario-based Requirements with Static Verification and Dynamic Testing
Two important prerequisites for achieving high quality software are solid requirements engineering and systematic testing. Scenarios and use cases are gaining increased attention in requirements engineering, as means for eliciting, documenting and validating requirements. Scenarios may also be a basis for testing. This paper identifies a number of possibilities of combining scenario-based requi...
متن کاملModelling and Test Verification of Suspension Optimal Damping Ratio for Electric Vehicles Considering Occupant-cushion and In-wheel Motor Effects
The damping ratio of chassis suspension is a key parameter for damping matching of in-wheel motor vehicles (IWMVs). Because the motor is attached to the driving wheel, the initial design method of the damping ratio for traditional cars is not entirely suitable for IWMVs. This paper proposes an innovative initial design method of the damping ratio for IWMVs. Firstly, a traveling vibration model ...
متن کاملReliability Optimization for Complicated Systems with a Choice of Redundancy Strategies (TECHNICAL NOTE)
Redundancy allocation is one of the common techniques to increase the reliability of the bridge systems. Many studies on the general redundancy allocation problems assume that the redundancy strategy for each subsystem is predetermined and fixed. In general, active redundancy has received more attention in the past. However, in real world, a particular system design contains both active and col...
متن کاملRedundancy allocation problem for k-out-of-n systems with a choice of redundancy strategies
To increase the reliability of a specific system, using redundant components is a common method which is called redundancy allocation problem (RAP). Some of the RAP studies have focused on k-out-of-n systems. However, all of these studies assumed predetermined active or standby strategies for each subsystem. In this paper, for the first time, we propose a k-out-of-<em...
متن کاملSeeding strategies in search-based unit test generation
Search-based techniques have been applied successfully to the task of generating unit tests for objectoriented software. However, as for any meta-heuristic search, the efficiency heavily depends on many factors; seeding, which refers to the use of previous related knowledge to help solve the testing problem at hand, is one such factor that may strongly influence this efficiency. This paper inve...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1999