PUBLICATION II Resistance of pine and spruce heartwood against decay – The effect of wood chemical composition and coating with water-borne wood oil product

نویسندگان

  • Hannu Viitanen
  • Sini Metsä-Kortelainen
  • Tapio Laakso
چکیده

Natural durability of wood has been widely studied, but the combination of the natural durability and different treatments has not been the focus of many studies. The durability of wooden products is mainly based on the water permeability and the resistance against organisms. In this study, the water absorption and decay resistance of sapwood and heartwood of Scots pine and Norway spruce were examined. The effects of the wood origin and the coating with water-borne wood oil were also observed. The wood oil is penetrating treatment which is recommended for decking and garden furniture. The results were compared to the chemical composition of wood. The water absorption of untreated pine sapwood was significantly higher than that of pine heartwood or spruce. Decay resistance of pine heartwood was relatively high. However, the decay resistance was widely varied among different pine heartwood samples and in some cases this variation was significantly higher than that of pine sapwood or spruce. The effect of wood oil coating on decay resistance of pine heartwood was more significant than on pine sapwood. Elevated decay resistance was also found among coated spruce samples, but no significant difference between sap and heartwood was found. Decay resistance was comparable with water permeability and pinosylvin content of wood.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

PUBLICATION III Decay resistance of sapwood and heartwood of untreated and thermally modified Scots pine and Norway spruce compared with some other wood species

Thermal modification has been developed for an industrial method to increase the biological durability and dimensional stability of wood. In this study the effects of thermal modification on resistance against softand brown-rot fungi of sapwood and heartwood of Scots pine and Norway spruce were investigated using laboratory test methods. Natural durability against soft-rot microfungi was determ...

متن کامل

IR-reflective Opaque Water-based Acrylic Coatings on White Pine Wood Substrates

Two sets of opaque water-based acrylic coatings were prepared with IR-reflective pigments and conventional pigments. The objective of this work was to determine the efficiency of IR-reflective pigments in limiting the heat buildup of opaque coating formulations. Experiments performed on PVC substrates revealed that IR-reflective pigments significantly decreased the temperature increase above ro...

متن کامل

Influence of Heat Transferring Media on Durability of Thermally Modified Wood

Studies on the durability and dimensional stability of a series of hardwoods and softwoods after thermal modification in vegetable oils and in steam atmospheres have been performed. Mass loss after exposure to Coniophora puteana (BAM Ebw.15) for 16 weeks was very low for European birch, European aspen, Norway spruce, and Scots pine thermally modified in a linseed oil product with preservative (...

متن کامل

Acetylation of wood – A review

Wood is a porous three dimensional, hydroscopic, viscoelastic, anisotropic bio-polymer composite composed of an interconnecting matrix of cellulose, hemicelluloses and lignin with minor amounts of inorganic elements and organic extractives. Some, but not all, of the cell wall polymer hydroxyl groups are accessible to moisture and these accessible hydroxyls form hydrogen bonds with water. As the...

متن کامل

Antibacterial Effects of Wood Structural Components and Extractives from Pinus sylvestris and Picea abies on Methicillin-Resistant Staphylococcus aureus and Escherichia coli O157:H7

Antibacterial properties of wood structural components and extractives were investigated against methicillin-resistant Staphylococcus aureus (MRSA) and Escherichia coli O157:H7 by placing bacterial inoculum on the model surfaces and incubating them for 2, 4, and 24 h. After incubation, the amount of viable bacteria on the surfaces was studied. The film coverage and thickness were evaluated with...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011