Hybrid Renewable Resource Based Full Bridge DC-DC Converters For Static Load Applications
نویسنده
چکیده
In Environmental friendly solutions are becoming more eminent than ever as a result of concern regarding the state of our worsen planet. This paper presents a modeling of solar and fuel cell hybrid isolated full bridge converter for electric vehicle driving system. The HFT (high frequency transformer) initiate in isolated full bridge boost converter for precipitate power conversion of photo voltaic and fuel cell power and provided isolation to source generation. Here, the hybrid inverter is controlled by SB-PWM (simple boost pulse width modulation). The proposed converter and transformer arrangement used to transfer the power to load concurrently. This limits of the individual power control used in primary inverter circuit. The system credibility is verified 1kW converter with two hybrid source for electric vehicle application with 58-120-V and 320-V output.
منابع مشابه
DSP Based Series-Parallel Connected Two Full-Bridge DC-DC Converter with Interleaving Output Current Sharing
Input-series-output-parallel (ISOP) connected DC-DC converters enable low voltage rating switches to be used in high voltage input applications. In this paper, a DSP is adopted to generate digital phase-shifted PWM signals and to fulfill the closed-loop control function for ISOP connected two full-bridge DC-DC converters. Moreover, a stable output current sharing control strategy is proposed fo...
متن کاملPassivity-Based Control of the DC-DC Buck Converters in High-Power Applications
In this paper, a novel approach for control of the DC-DC buck converter in high-power and low-voltage applications is proposed. Designed method is developed according to passivity based controller which is able to stabilize output voltage in a wide range of operation. It is clear that in high-power applications, parasitic elements of the converter may become comparable with load value and hence...
متن کاملA Multi-port High Step-up DC/DC Converter for Hybrid Renewable Energy Application
This paper presents a novel multi-port DC/DC converter which is suitable to be used as the interface of hybrid renewable energy systems. The converter contains three unidirectional power flow ports which two of them are input ports and are connected to two independent energy sources while the third one is the output port that feeds a standalone load. Furthermore, the proposed converter contains...
متن کاملDevelopment of Average Model for Control of a Full Bridge PWM DC-DC Converter
This paper presents a detailed small-signal and transient analysis of a full bridge PWM DC-DC converter designed for high voltage, high power applications using an average model. The derived model is implemented in a typical system and used to produce the small-signal and transient characteristics of the converter. Results obtained in the analysis of the high voltage and high power design examp...
متن کاملA Modified Phase-Shifted Pulse Width Modulation to Extend Linear Operation of Hybrid Modular Multi-level Converter
Recently, hybrid modular multi-level converters, which are configured as full and half bridge sub-modules, are developed and utilized in the wide area of applications. Compared to its non-hybrid counterpart, these converters have several advantages such as the ability to nullify the DC side fault current and controlling AC side reactive power during the faults. This paper proposes a modified ph...
متن کامل