Fe Analysis of Steel Links for Seismic Resistant Timber Frames

نویسندگان

  • Federico Massimo Mazzolani
  • Raffaele Landolfo
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Numerical Study of Seismic Behavior of High Strength Steel Replaceable Shear Links

Title of Document: NUMERICAL STUDY OF SEISMIC BEHAVIOR OF HIGH STRENGTH STEEL REPLACEABLE SHEAR LINKS Huiling Hu Master of Science, 2015 Directed By: Yunfeng Zhang, Professor Department of Civil and Environmental Engineering Eccentrically Braced Frames (EBFs) have been widely used in seismic protection and remediation in the recent years. However, the seismic behavior of shear links made of hig...

متن کامل

A Comparison of Seismic Safety of Steel MRF Designed According to Different Editions of Iranian Seismic Code

In this paper, efforts are made to compare the safety of steel moment resistant frames designed according to different editions of the Iranian code of Practice for seismic resistant design of buildings. Also, failure risk of a low and medium height frame which designed for high and low seismicity regions according to three editions of the code are evaluated. First, the testing cases were design...

متن کامل

Selection of Optimal Intensity Measure for Seismic Assessment of Steel Buckling Restrained Braced Frames under Near-Fault Ground Motions

Buckling restrained braces (BRBs) have a similar behavior under compression and tension loadings. Therefore, they can be applied as a favorable lateral load resisting system for structures. In the performance-based earthquake engineering (PBEE) framework, an intermediate variable called intensity measure (IM) links the seismic hazard analysis with the structural response analyses. An optimal IM...

متن کامل

Seismic Behavior of Direct Displacement-based Designed Eccentrically Braced Frames

Direct Displacement-Based Design (DDBD) is a performence-based seismic design method that has been proposed and well developed over the past two decades to design RC frame structures, shear walls and bridges. In this method, the behavior of a multi-degree-of-freedom (MDOF) sysytem is approximaeted by an equivalent single-degree-of-freedom (SDOF) substitute structure. Although this method has be...

متن کامل

Parametric studies of seismic behavior of steel frames equipped with yielding elements

Yielding elements (YE) are among those devices that not only help control structural damages, but make better seismic behavior by concentrating the frames in some removable part of the structures. YE are located at the intersection of Concentric Braced Frame (CBF) in a rectangular shape. In this paper, Seismic behavior of the frames with YE will be investigated. For this reason, 5 braced steel ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014