Fabrication and Measurement of a Suspended Nanochannel Microbridge Resonator Monolithically Integrated with CMOS Readout Circuitry
نویسندگان
چکیده
We present the fabrication and characterization of a suspended microbridge resonator with an embedded nanochannel. The suspended microbridge resonator is electrostatically actuated, capacitively sensed, and monolithically integrated with complementary metal-oxide-semiconductor (CMOS) readout circuitry. The device is fabricated using the back end of line (BEOL) layers of the AMS 0.35 μm commercial CMOS technology, interconnecting two metal layers with a contact layer. The fabricated device has a 6 fL capacity and has one of the smallest embedded channels so far. It is able to attain a mass sensitivity of 25 ag/Hz using a fully integrable electrical transduction.
منابع مشابه
Fabrication and Characterization of an Integrated Microsystem for Biomolecular Preconcentration and Sensing
1 We report on a fabrication and packaging process for a microsystem consisting of a mass-based 2 protein detector and a fully integrated preconcentrator. Preconcentration of protein is achieved 3 by means of a nanofluidic concentrator, which takes advantage of fast non-linear electro-osmotic 4 flow near a nanochannel-microchannel junction to concentrate charged molecules inside a 5 volume of f...
متن کاملDual-Beam Actuation of Piezoelectric AlN RF MEMS Switches Monolithically Integrated with AlN Contour-Mode Resonators
This work reports on piezoelectric Aluminum Nitride (AlN) based dual-beam RF MEMS switches that have been monolithically integrated with AlN contour-mode resonators. The dual-beam switch design presented in this paper intrinsically compensates for the residual stress in the deposited films, requires low actuation voltage (5 to 20 V), facilitates active pull-off to open the switch and exhibits f...
متن کاملNanoelectromechanical system-integrated detector with silicon nanomechanical resonator and silicon nanochannel field effect transistor
We demonstrate the fabrication and operation of an integrated device containing a nanoelectromechanical system and an integrated detector. This on-chip silicon nanochannel field effect transistor is used to measure the motion of a silicon nanomechanical resonator at room temperature. Furthermore, we describe the operation of the device as a silicon-based room-temperature on-chip amplifier for i...
متن کاملDielectrophoretic assembly and integration of nanowire devices with functional CMOS operating circuitry
We present a novel platform for the development and deployment of nanosensors in integrated systems. The nanosensor technology is based on ‘‘striped’’ high aspect ratio cylindrical structures grown using porous membranes as templates. These nanostructures are manipulated using dielectrophoretic forces, allowing their individual assembly and characterization. This assembly also enables the devel...
متن کاملFabrication of cantilever based mass sensors integrated with CMOS using direct write laser lithography on resist
A CMOS compatible direct write laser lithography technique has been developed for cantilever fabrication on pre-fabricated standard CMOS. We have developed cantilever based sensors for mass measurements in vacuum and air. The cantilever is actuated into lateral vibration by electrostatic excitation and the resonant frequency is detected by capacitive readout. The device is integrated on standar...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Micromachines
دوره 7 شماره
صفحات -
تاریخ انتشار 2016