Interpretations of Indentation Size
نویسندگان
چکیده
For very shallow indentations in W, Al, Au, and Fe-3wt%Si single crystals, hardness decreased with increasing depth irrespective of increasing or decreasing strain gradients. As such, strain gradient theory appears insufficient to explain the indentation size effect (ISE) at depths less than several hundred nanometers. Present research links the ISE to a ratio between the energy of newly created surface and plastic strain energy dissipation. Also, the contact surface to plastic volume ratio was nearly constant for a range of shallow depths. Based on the above, an analytical model of hardness versus depth provides a satisfactory fit to the experimental data and correlates well with embedded atom simulations. @DOI: 10.1115/1.1469004#
منابع مشابه
Nano-indentation of Copper Thin Films on Silicon Substrates
Indentation methods are finding increasing use in the study of mechanical properties of bulk and thin-film materials over a wide range of size scales (e.g., [1,2]). With the increasing sophistication of instrumented, depth-sensing indentation equipment and of computational methods to model the deformation of materials subjected to indentation, there is growing interest in studying the elastopla...
متن کاملIndentation of Plastically Graded Materials by In - Suk
The introduction of certain controlled gradients in plastic properties is known to promote resistance to the onset of damage at contact surfaces during some tribological applications. Gradients in composition, microstructure and plastic properties can also be deleterious to contact-damage resistance in some situations. In order to realize such potentially beneficial or deleterious effects of pl...
متن کاملMechanics of indentation of plastically graded materials—I: Analysis
The introduction of controlled gradients in plastic properties is known to influence the resistance to damage and cracking at contact surfaces in many tribological applications. In order to assess potentially beneficial effects of plastic property gradients in tribological applications, it is essential first to develop a comprehensive and quantitative understanding of the effects of yield stren...
متن کاملA Mechanical Model to Interpret Cell-Scale Indentation Experiments on Plant Tissues in Terms of Cell Wall Elasticity and Turgor Pressure
Morphogenesis in plants is directly linked to the mechanical elements of growing tissues, namely cell wall and inner cell pressure. Studies of these structural elements are now often performed using indentation methods such as atomic force microscopy. In these methods, a probe applies a force to the tissue surface at a subcellular scale and its displacement is monitored, yielding force-displace...
متن کاملIndentation of a laminated composite plate with an interlayer rectangular void
We employ the Eshelby–Stroh formalism to study generalized plane strain infinitesimal deformations caused due to the indentation by a rigid circular cylinder of an elastic laminated plate with a throughthe-width rectangular void between two adjoining layers. Assuming that the void does not close during the indentation process, we find the indentation modulus (i.e., the slope of the indentation ...
متن کامل