Ultrasensitive strain sensors made from metal-coated carbon nanofiller/epoxy composites
نویسندگان
چکیده
NOTICE: this is the author’s version of a work that was accepted for publication in Carbon. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Carbon, [Volume 51, (January 2013)] DOI: 10.1016/j.carbon.2012.08.029
منابع مشابه
Strain Measurement of Carbon Composites Using Advanced Sensor Technology
This paper reports the sensor integration method into carbon composites for the development of Structural Health Monitoring (SHM). Early detection and long term monitoring of the specific properties of composites will improve the security and prolong the time of service 1 . The core function of SHM is the damage detection and identification at elevated temperatures, over loads and corrosion. Va...
متن کاملExperimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites
This paper investigated the effect of the amine-functionalized carbon nanotubes (CNTs) on the thermomechanical properties of CNT/epoxy nanocomposites. Mechanical stirring and ultra-sonication were utilized to uniformly disperse CNTs into the epoxy matrix. Non-functionalized and amine-functionalized CNTs with different weight percentages (wt. %) were mixed into the epoxy resin. Using standard te...
متن کاملCarbon Fiber Epoxy Composites for Both Strengthening and Health Monitoring of Structures
This paper presents a study of the electrical and mechanical behavior of several continuous carbon fibers epoxy composites for both strengthening and monitoring of structures. In these composites, the arrangement of fibers was deliberately diversified to test and understand the ability of the composites for self-sensing low strains. Composites with different arrangements of fibers and textile w...
متن کاملEnhanced mechanical properties of nanocomposites at low graphene content.
In this study, the mechanical properties of epoxy nanocomposites with graphene platelets, single-walled carbon nanotubes, and multi-walled carbon nanotube additives were compared at a nanofiller weight fraction of 0.1 +/- 0.002%. The mechanical properties measured were the Young's modulus, ultimate tensile strength, fracture toughness, fracture energy, and the material's resistance to fatigue c...
متن کاملEffective mechanical properties of ‘‘fuzzy fiber’’ composites
In this paperwe investigate themechanical behavior of carbonfiber composites,where the carbonfibers are coated with radially aligned carbon nanotubes. For this purpose we develop a general micromechanics method for fiber composites, where fibers are coated with radially aligned microfibers (‘‘fuzzy fiber’’ composites). The mechanical effective properties are computed with a special extension of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014