Upgraded metallurgical-grade silicon solar cells with efficiency above 20%

نویسندگان

  • P. Zheng
  • F. E. Rougieux
  • C. Samundsett
  • Xinbo Yang
  • Yimao Wan
  • J. Degoulange
  • R. Einhaus
  • P. Rivat
  • D. Macdonald
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Simulation of 20.96% efficiency n-type Czochralski UMG silicon solar cell

In this paper, we present the 3D simulation of>20% efficiency solar cells using n-type 100% Upgraded-Metallurgical Grade (UMG) Czochralski (CZ) silicon and Electronic Grade (EG) Float Zone (FZ) fabricated using the same process. The cells have a passivated emitter rear locally diffused (PERL) structure, with an etch-back approach on the rear to maintain high bulk lifetime in the cells via phosp...

متن کامل

Performance Analysis of a Grid-Connected Upgraded Metallurgical Grade Silicon Photovoltaic System

Because of their low cost, photovoltaic (PV) cells made from upgraded metallurgical grade silicon (UMG-Si) are a promising alternative to conventional solar grade silicon-based PV cells. This study investigates the outdoor performance of a 1.26 kW grid-connected UMG-Si PV system over five years, reporting the energy yields and performance ratio and estimating the long-term performance degradati...

متن کامل

Electrotechnology for Silicon Refining: Plasma Generator and Arc Furnace: Installations and Theoretical Base

The photovoltaic and the semiconductor industries are in growth and it is necessary to supply a large amount of silicon to maintain this growth. Since silicon is still the best material for the manufacturing of solar cells and semiconductor components so the pure silicon like solar grade and semiconductor grade materials are demanded. There are two main routes for silicon production: metallurgi...

متن کامل

Measuring dopant concentrations in p-type silicon using iron-acceptor pairing monitored by band-to-band photoluminescence

This paper introduces a photoluminescence-based technique for determining the acceptor concentration in silicon wafers by measuring the formation rate of iron-acceptor pairs. This rate is monitored by bandto-band photoluminescence in low injection, the intensity of which is proportional to the carrier lifetime. The technique is demonstrated with an iron-implanted float zone silicon wafer, heavi...

متن کامل

Study the Effect of Silicon Nanowire Length on Characteristics of Silicon Nanowire Based Solar Cells by Using Impedance Spectroscopy

Silicon nanowire (SiNW) arrays were produced by electroless method on polycrystalline Si substrate, in HF/ AgNO3 solution. Although the monocrystalline silicon wafer is commonly utilized as a perfect substrate, polycrystalline silicon as a low cost substrate was used in this work for photovoltaic applications. In order to study the influence of etching time (which affects the SiNWs length) on d...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017