Steady-State Grain Size in Dynamic Recrystallization of Minerals
نویسنده
چکیده
منابع مشابه
Dynamic recrystallization kinetics of AISI 403 stainless steel using hot compression test
In this work dynamic recrystallization behavior of AISI 403 martensitic stainless steel was studied using hot compression tests over temperature range of 900 C -1200 C and strain rate range of 0.001 s-1 - 1 s-1. The obtained flow curves showed that the hot compression behavior of the alloy is controlled by dynamic recrystallization. The flow stress and strain corresponding to the critical, pe...
متن کاملEvolution of recorded microstructures in minerals during cooling of Zarrin intrusion, evidence for dynamic deformation
The Zarrin granitoids is located in the west of Yazd block, Central Iran. Zarrin granitoids exhibit mylonitic rocks ranging from protomylonitic to mylontic. In Zarrin granitoids examples of sub-magmatic, microstructures are represented by chessboard patterns in quartz and sub-magmatic fractures in plagioclase, indicating deformation at high-temperature conditions (T > 650º C) and the presence o...
متن کاملIce grain size and the rheology of the martian polar deposits
The history and dynamics of the martian polar deposits (MPD), the largest known water reservoirs on Mars, are of great interest, but estimates of ice grain size are required before detailed modeling can be performed. We clarify the microphysical processes that may control grain size in the MPD. If the MPD are ∼2% dust by mass, the maximum ice grain size is ∼1 mm due to grain boundary pinning by...
متن کاملGrain Size Effect on the Hot Deformation Processing Map of AISI 304 Austenitic Stainless Steel
In this study, the hot deformation processing map of AISI 304 austenitic stainless steel in two initial grain sizes of 15 and 40 μm was investigated. For this purpose, cylindrical samples were used in the hot compression test at the temperature range of 950-1100 °C and the strain rate of 0.005-0.5% s-1. At first, the relationship between the peak stress and Zener-Hollomon parameter w...
متن کاملFriction stir welding of Al-Al2O3 nanocomposite with bimodal size of alumina reinforcement produced by spark plasma sintering
Solid state joining of powder metallurgy (P/M) processed and sintered by spark plasma sintering through friction stir welding (FSW) was studied. The nanocomposites were prepared via mechanical milling followed by spark plasma sintering. The microstructural and mechanical of the joints were evaluated as a function of the different processing parameters such as rotating and advancing speeds of th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017