Attraction of mesoscale objects on the surface of a thin elastic film supported on a liquid.

نویسندگان

  • Aditi Chakrabarti
  • Manoj K Chaudhury
چکیده

We study the interaction of two parallel rigid cylinders on the surface of a thin elastic film supported on a pool of liquid. The excess energy of the surface due to the curvature of the stretched film induces attraction of the cylinders that can be quantified by the variation of their gravitational potential energies as they descend into the liquid while still floating on the film. Although the experimental results follow the trend predicted from the balance of the gravitational and elastic energies of the system, they are somewhat underestimated. The origin of this discrepancy is the hysteresis of adhesion between the cylinder and the elastic film that does not allow the conversion of the total available energy into gravitational potential energy, as some part of it is recovered in stretching the film behind the cylinders while they approach each other. A modification of the model accounting for the effects of adhesion hysteresis improves the agreement between theoretical and experimental results. The contribution of the adhesion hysteresis can be reduced considerably by introducing a thin hydrogel layer atop the elastic film that enhances the range of attraction of the cylinders (as well as rigid spheres) in a dramatic way. Morphological instabilities in the gel project corrugated paths to the motion of small spheres, thus leading to a large numbers of particles to aggregate along their defects. These observations suggest that a thin hydrogel layer supported on a deformable elastic film affords an effective model system to study elasticity and defects mediated interaction of particles on its surface.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Instabilities of Thin Viscous Liquid Film Flowing down a Uniformly Heated Inclined Plane

Instabilities of a thin viscous film flowing down a uniformly heated plane are investigated in this study. The heating generates a surface tension gradient that induces thermocapillary stresses on the free surface. Thus, the film is not only influenced by gravity and mean surface tension but also the thermocapillary force is acting on the free surface. Moreover, the heat transfer at the free su...

متن کامل

Effect of bias voltage on structural and mechanical characteristics of diamond-like carbon thin film applied by ion beam deposition

This study, investigates the effect of bias voltage on structural changes of diamond-like carbon thin film created by ion beam deposition is investigated. For this purpose, the bias voltage in the values of 0 V, -50 V, -100 V and -150 V on the AA5083 aluminum alloy was considered. Raman spectroscopy was used to evaluate structural. Influence of the bias voltage on the thickness and roughness of...

متن کامل

Adjustable Plasmonic Bandgap in One-Dimensional Nanograting Based on Localized and Propagating Surface Plasmons

Compared to the long history of plasmonic gratings, there are only a few studies regarding the bandgap in the propagation of plasmonic surface waves. Considering the previous studies on interpretation of plasmonic bandgap formation, we discuss this phenomenon using the effect of both surface plasmon polariton (SPP) and localized surface plasmon (LSP) for our fabricated one-dimensional metallic-...

متن کامل

Solid surface tension measured by a liquid drop under a solid film.

We show that a drop of liquid a few hundred microns in diameter placed under a solid, elastic, thin film (∼10 μm thick) causes it to bulge by tens of microns. The deformed shape is governed by equilibrium of tensions exerted by the various interfaces and the solid film, a form of Neumann's triangle. Unlike Young's equation, which specifies the contact angles at the junction of two fluids and a ...

متن کامل

Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application

CdTe thin films with 2.8 µm thickness were deposited by electron beam evaporation method. X-ray diffraction, scanning electron microscopy, UV-Vis-NIR spectroscopy and atomic force microscopy (AFM) were used to characterize the films. The results of AFM analysis revealed that the CdTe films have uniform surface. CdTe thin films were heat-treated by SnCl2 solution. Structural analysis using XRD s...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Langmuir : the ACS journal of surfaces and colloids

دوره 31 6  شماره 

صفحات  -

تاریخ انتشار 2015