Temperature effects on the bulk discharge current of dielectric films of MEMS capacitive switches
نویسندگان
چکیده
0026-2714/$ see front matter 2012 Elsevier Ltd. A http://dx.doi.org/10.1016/j.microrel.2012.06.005 ⇑ Corresponding author. Tel.: +30 210 727 6722; fa E-mail address: [email protected] (M. Ko Kelvin probe method has been directly applied to capacitive MEMS switches in order to investigate temperature activated mechanisms in PECVD Silicon Nitride (SiNx) films. The bulk discharge current of MEMS capacitive switches has been determined for different charging and discharging temperatures, in the range of 300–400 K. The increase of discharging temperature leads to an increase of the magnitude of the bulk discharge current and the relaxation time of the discharging process is found to be thermally activated. Finally, it is shown that the increase of charging temperature assists trapping at centers characterized by time constants even longer than the time window of observation, i.e. 10 s. 2012 Elsevier Ltd. All rights reserved.
منابع مشابه
Design and simulation of a RF MEMS shunt capacitive switch with low actuation voltage, low loss and high isolation
According to contact type, RF MEMS switches are generally classified into two categories: Capacitive switches and Metal-to-Metal ones. The capacitive switches are capable to tolerate a higher frequency range and more power than M-to-M switches. This paper presents a cantilever shunt capacitive RF MEMS switch with characteristics such as low trigger voltage, high capacitive ratio, short switchin...
متن کاملA study of deposition conditions on charging properties of PECVD silicon nitride films for MEMS capacitive switches
Keywords: RF MEMS capacitive switch Dielectric charging Silicon nitride PECVD method a b s t r a c t The present paper aims to provide a better insight to the electrical characteristics of silicon nitride films that have been deposited with PECVD method under different conditions. The effect of film thickness, substrate temperature and the frequency that produces the plasma in PECVD method on t...
متن کاملTransport and charging mechanisms in Ta2O5 thin films for capacitive RF MEMS switches application
The potential of sputtered Ta2O5 thin films to be used as dielectric layers in capacitive radio frequency microelectromechanical system switches is evaluated by investigating two factors of crucial importance for the performance of these devices which are the transport mechanisms and the charging effects in the dielectric layer. We find that Ta2O5 films show good electrical and dielectrical pro...
متن کاملStructure dependent charging process in RF MEMS capacitive switches
The paper investigates the dependence of charging process on the dielectric charging of radiation induced defects in Si3N4 and SiO2 dielectric films, which are used in RF-MEMS switches. The radiation has been performed with 5 MeV alpha particles. The assessment has been carried out in Metal-Insulator-Metal capacitors with the thermally stimulated depolarization currents and discharge current tr...
متن کاملAssessment of dielectric charging in electrostatically driven MEMS devices: A comparison of available characterization techniques
The present work investigates the results of different characterization methods for the dielectric charging phenomenon applicable to metal–insulator–metal (MIM) capacitors and electrostatically actuated microelectro-mechanical-systems (MEMS). The discharge current transients (DCT), thermally stimulated depolarization current (TSDC) and Kelvin probe force microscopy (KPFM) assessment methods hav...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Microelectronics Reliability
دوره 52 شماره
صفحات -
تاریخ انتشار 2012