Water-soluble UV curable urethane methyl acrylate coating: preparation and properties.
نویسندگان
چکیده
Two kinds of water-soluble and ultraviolet (UV) curable oligomers were synthesized and characterized. The oligomers were evaluated as resins for water-based UV curable coating. The rheology of the two oligomers' aqueous solutions was investigated in terms of solid fraction, pH dependence, and temperature dependence. The solutions were found to be Newtonian fluid showing rather low viscosity even at high solid fraction of 0.55. The drying process of the coatings and the properties of the cured coatings were studied by comparing them with water-dispersed UV-curable polyurethane methyl acrylate. It was evident that the water-soluble coating dried more slowly; and that the overall properties were inferior to those of the water-dispersed coating.
منابع مشابه
Thermal Conductivity and Viscoelastic Properties of UV-curable Urethane Acrylate Reinforced with Modified Al2O3 Nanoparticles
In this study, UV-curable urethane acrylate UA synthesized and then characterized by FTIR and HNMR. For better dispersion of nanoparticles in polymeric matrix, nano Al2O3 was modified by silane coupling agent and then its nanocomposites were prepared. The characteristics of synthesized nanocomposites were analyzed by TGA, DMA and infrared thermography. The results signify that adding nano Al2O3...
متن کاملFabrication and study of structural, optical and electrical properties of UV curable conductive polyurethane acrylate films containing polyaniline-Co3O4 nanocomposites
In this research, Novel UV curable conductive nanocomposites containing urethane acrylate and PANi-Co3O4 nanocomposite have been prepared. At first, PANi- Co3O4 nanocomposites have been synthesized and then PUA-PANi-Co3O4 nanocomposites films were prepared by ultraviolet radiation. UV-Vis and FT-IR studies confirm that there was strong chemical interaction between PANi and Co3O4 nanoparticles, ...
متن کاملStudy the curing behavior and mechanical properties of Pigmented UV curable epoxy acrylate monomers
The formulations contained different acrylate monomer with different structure and functionalities and TiO2, were applied to obtain pigmented acrylic films by UV exposure. The conversion and mechanical characteristic were correlated. The results showed that there is a significant interaction between pigment, reactive diluents’ type and mechanical properties of coatings. It seems that cured film...
متن کاملDesign and synthesis of bio-based UV curable PU acrylate resin from itaconic acid for coating applications
UV curable PUA resin was successfully synthesized from polyol based on sustainable resource originated from itaconic acid (IA), isophorone diisocyanate (IPDI) and 2-hydroxyethyl methacrylate (HEMA). A polyol was synthesized by condensation reaction of IA with 16-hexanediol in the presence of p-Toluenesulfonic acid (pTSA). The synthesized PUA resin was characterized for its structural elucidatio...
متن کاملQuantum yield and lifetime data analysis for the UV curable quantum dot nanocomposites
The quantum yield (QY) and lifetime are the important parameters for the photoluminescent materials. The data here report the changes of the QY and lifetime for the quantum dot (QD) nanocomposite after the UV curing of the urethane acrylate prepolymer. The data were collected based on the water soluble CdTe QDs and urethane acrylate prepolymer. Colloidal QDs were in various concentration from 0...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of Zhejiang University. Science
دوره 5 8 شماره
صفحات -
تاریخ انتشار 2004