High-Speed Computation using FPGA for Excellent Performance of Direct Torque Control of Induction Machines
نویسندگان
چکیده
The major problems in hysteresis-based DTC are high torque ripple and variable switching frequency. In order to minimize the torque ripple, high sampling time and fast digital realization should be applied. The high sampling and fast digital realization time can be achieved by utilizing high-speed processor where the operation of the discrete hysteresis regulator is becoming similar to the operation of analog-based comparator. This can be achieved by utilizing field programmable gate array (FPGA) which can perform a sampling at a very high speed, compared to the fact that developing an ASIC chip is expensive and laborious.
منابع مشابه
Seven-Level Direct Torque Control of Induction Motor Based on Artificial Neural Networks with Regulation Speed Using Fuzzy PI Controller
In this paper, the author proposes a sensorless direct torque control (DTC) of an induction motor (IM) fed by seven-level NPC inverter using artificial neural networks (ANN) and fuzzy logic controller. Fuzzy PI controller is used for controlling the rotor speed and ANN applied in switching select stator voltage. The control method proposed in this paper can reduce the torque, stator flux and to...
متن کاملOn Line Determination of Optimal Hysteresis Band Amplitudes in Direct Torque Control of Induction Motor Drives
In conventional direct torque control (DTC) of induction machines, undesirable flux and torque ripples are produced. These occur since non of the selected inverter's voltage vectors are able to generate the exact voltage required to produce the desired changes in the electromagnetic torque and stator flux linkage in most of the switching instances. In addition, when direct torque control is imp...
متن کاملInvestigating Direct Torque Control of Six-Phase Induction Machines Under Open Phase Fault Conditions
This paper presents analysis and evaluation of classical direct torque control(DTC), for controlling a symmetrical six phase induction motor (SPIM) under open phasefault conditions. The machine has two three-phase windings spatially shifted by 60 electricaldegrees. The strategy of the proposed method consists of choosing the switching modesaccording to the configuration of living phases in such...
متن کاملDesign and Implementation of Direct Torque Control Based on an Intelligent Technique of Induction Motor on FPGA
In this paper the hardware implementation of the direct torque control based on the fuzzy logic technique of induction motor on the Field-Programmable Gate Array (FPGA) is presented. Due to its complexity, the fuzzy logic technique implemented on a digital system like the DSP (Digital Signal Processor) and microcontroller is characterized by a calculating delay. This delay is due to the process...
متن کاملHardware Implementation of a Predictive DTC-SVM with a Sliding Mode Observer of an Induction Motor on the FPGA
The first objective of this research is to present an improved Direct Torque Control based on the Space Vector Modulation (DTC-SVM) and a Sliding Mode Observer (SMO). The disadvantages of the conventional Direct Torque Control (DTC) are the high ripples for the electromagnetic torque and the stator flux, as well as the distortions of the stator current. To solve these problems, we have used the...
متن کامل