Phase Slip in an Undulator with Pole and Bpm Errors
نویسنده
چکیده
A statistical analysis of a corrected electron trajectory through a planar FEL undulator is used to predict the optimal beam position monitor (BPM) spacing. The undulator is composed of modular sections, each containing many dipoles with random field and roll angle errors. Located between each section are inaccurate BPMs, steering correctors, and possibly quadrupole magnets. An analytical formula for electron-to-photon phase errors is derived and used to estimate the best BPM spacing. The results are applied to the LCLS FEL undulator [1], which has demanding requirements on electron trajectory straightness.
منابع مشابه
Linac Coherent Light Source Undulator Rf Bpm System *
The Linac Coherent Light Source (LCLS) will be the world's first x-ray free-electron laser (FEL) when it becomes operational in 2009. The LCLS is currently in the construction phase. The beam position monitor (BPM) system planned for the LCLS undulator will incorporate a high-resolution X-band cavity BPM system described in this paper. The BPM system will provide high-resolution measurements of...
متن کاملTHE 90-mm PERIOD UNDULATOR FOR SRRC
The U9/SRRC undulator has recently been completed by STI Optronics, Inc. (STI) for use at the Synchrotron Radiation Research Center (SRRC) in Hsinchu, Taiwan, R.O.C. This 4.5-m long, 90-mm period wedged-pole hybrid undulator builds on several aspects of previous STI designs [1] while including a number of significant enhancements. The magnetics are based on the wedged-pole geometry [2] with add...
متن کاملInvestigation of unbalanced magnetic force in permanent magnet brushless dc machines with diametrically asymmetric winding
The purpose of this paper is the calculation of Unbalanced Magnetic Force (UMF) in permanent magnet brushless DC (PMBLDC) machines with diametrically asymmetric winding and investigation of UMF variations in the presence of phase advance angle. This paper presents an analytical model of UMF in surface mounted PMBLDC machines that have a fractional ratio of slot number to pole number. This model...
متن کاملDesign and fabrication of a prototype planar undulator
The main goal of this work is to get the fabrication technology of the insertion devices. A prototype undulator with the period of 48mm and the peak magnetic field of 0.75 T has been fabricated using NdFeB-SH35 magnets based on the cooperation between ILSF and NSTRI. The total magnet length is 483 mm and the number of periods is 8. The magnetic parameters of the undulator are determined in orde...
متن کاملEffects of Geometrical Errors on the Field Quality in a Planar Superconducting Undulator
Short-period superconducting undulators are being developed at the Advanced Photon Source (APS). A 21period undulator prototype is being fabricated. Later, the short coil will be replaced with a longer one using the same cryostat. A high quality magnetic field with a phase error of 2 degrees rms was achieved in the prototype magnets due to accurate winding of the superconducting coils on the pr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2001